Language
English

Hello Guest!
Login / Register
Your Cart 0
€0.00

Turning


Turning Internal or external turning, is a mechanical operation by means of chip removal, considering the workpiece in rotation and the use of a cutting tool that through the execution of a profile, external or internal turning of a hole, removes excess workpiece material. To perform a turning or profiling operation, it is necessary to make sure and check that the machine condition, especially the rigidity and play of the slides, the rigidity of the main spindle, the exact height adjustment and the centring of the tool, are correct. In some cases, vibration problems may be caused by the tool protruding too far from the tool holder, or the tool holder not being rigid enough. In this case, it is a good idea to check that the choice of tool, of the tool holder, is in line with the expectations or performance required during machining. If you buy from Tadaah, you will have the support you need to find out in advance what costs and when your machine tool might cause you problems with scra…

Read more…

View as Grid List

Items 1-48 of 63

Set Descending Direction
per page
Page
  1. GASPARI UTENSILI SCTCL Cartucce ISO sinistre per inserti CCMT – angolo 60° per tornitura interna e barenatura

    GASPARI UTENSILI SCTCL Left-hand ISO cartridges for CCMT inserts – 60° angle for internal turning and boring

    As low as €99.75
    (Incl. Tax: €121.70)
  2. GASPARI UTENSILI SCTCR Cartucce ISO destre per inserti CCMT – angolo 60° per tornitura interna e barenatura

    GASPARI UTENSILI SCTCR Right-hand ISO cartridges for CCMT inserts – 60° angle for internal turning and boring

    As low as €99.75
    (Incl. Tax: €121.70)
  3. GASPARI UTENSILI SCSCL Left-hand ISO cartridges for CCMT inserts – 45° angle for internal turning and boring

    GASPARI UTENSILI SCSCL Left-hand ISO cartridges for CCMT inserts – 45° angle for internal turning and boring

    As low as €99.75
    (Incl. Tax: €121.70)
  4. GASPARI UTENSILI SCSCR Right-hand ISO cartridges for CCMT inserts – 45° angle for internal turning and boring

    GASPARI UTENSILI SCSCR Right-hand ISO cartridges for CCMT inserts – 45° angle for internal turning and boring

    As low as €99.75
    (Incl. Tax: €121.70)
  5. GASPARI UTENSILI SCRCL Cartucce ISO sinistre per inserti CCMT – angolo 75° per tornitura interna e barenatura

    GASPARI UTENSILI SCRCL Left-hand ISO cartridges for CCMT inserts – 75° angle for internal turning and boring

    As low as €99.75
    (Incl. Tax: €121.70)
  6. GASPARI UTENSILI SCRCR Cartucce ISO destre per inserti CCMT – angolo 75° per tornitura interna e barenatura

    GASPARI UTENSILI SCRCR Right-hand ISO cartridges for CCMT inserts – 75° angle for internal turning and boring

    As low as €99.75
    (Incl. Tax: €121.70)
  7. Gaspari utensili SCLCL Left-hand ISO cartridges for CCMT inserts – 95° angle for internal turning and boring

    Gaspari utensili SCLCL Left-hand ISO cartridges for CCMT inserts – 95° angle for internal turning and boring

    As low as €99.75
    (Incl. Tax: €121.70)
  8. Gaspari utensili SCLCR Cartucce ISO destre per inserti CCMT – angolo 95° per tornitura interna e barenatura

    Gaspari utensili SCLCR Right-hand ISO cartridges for CCMT inserts – 95° angle for internal turning and boring

    As low as €99.75
    (Incl. Tax: €121.70)
  9. Gaspari utensili SCGCL ISO Cartridges for CCMT 1204 Inserts – Left-Hand 90° Angle for Internal Turning and Boring

    Gaspari utensili SCGCL ISO Cartridges for CCMT 1204 Inserts – Left-Hand 90° Angle for Internal Turning and Boring

    As low as €99.75
    (Incl. Tax: €121.70)
  10. Gaspari utensili SCGCR ISO Cartridges for CCMT 1204 Inserts – 90° angle right-hand for internal turning and boring

    Gaspari utensili SCGCR ISO Cartridges for CCMT 1204 Inserts – 90° angle right-hand for internal turning and boring

    As low as €99.75
    (Incl. Tax: €121.70)
  11. Gaspari utensili SCFCL Left ISO cartridges for internal boring 90°, CCMT inserts, variable Ømin

    Gaspari utensili SCFCL Left ISO cartridges for internal boring 90°, CCMT inserts, variable Ømin

    As low as €99.75
    (Incl. Tax: €121.70)
  12. Gaspari utensili SCFCR Right ISO cartridges for internal boring 90°, CCMT inserts, variable Ømin

    Gaspari utensili SCFCR Right ISO cartridges for internal boring 90°, CCMT inserts, variable Ømin

    As low as €99.75
    (Incl. Tax: €121.70)
  13. CBR Micro Bareno per profili interni destro con rompitruciolo Carmex Tiny Tools in metallo duro rivestito TNX, fantina mobile, selezionare la dimensione X per il foro e L1 per la profondità

    CBR CARMEX Small boring for internal profiles with advanced Chip Breaker Tiny Tools right version full carbide coated TNX, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    As low as €58.30
    (Incl. Tax: €71.13)
  14. CBLTNX Micro Bareno per profili interni sinistro con rompitruciolo Carmex Tiny Tools in metallo duro rivestito TNX, fantina mobile, selezionare la dimensione X per il foro e L1 per la profondità

    CBLTNX Small boring for internal profiles with advanced Chip Breaker Tiny Tools left version Carmex full carbide coated TNX, Swiss Type machines, choose Dimension X for the hole and L1 for the depth

    As low as €58.30
    (Incl. Tax: €71.13)
  15. MXR CARMEX Micro Bareno destro per tornitura posteriore Tiny Tools in metallo duro non rivestito K20, rivestito BXC o BMK, fantina mobile, selezionare la dimensione d1 per il foro e L1 per la profondità

    MXR CARMEX Small boring Tiny Tools right version for back turning full carbide uncoated K20, coated BMK and BXC, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    As low as €51.60
    (Incl. Tax: €62.95)
  16. CMTRDX Small boring Tiny Tools right version Carmex, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    CMTRDX Small boring Tiny Tools right version Carmex, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    As low as €45.10
    (Incl. Tax: €55.02)
  17. CMTLSX Small boring Tiny Tools left version Carmex, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    CMTLSX Small boring Tiny Tools left version Carmex, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    As low as €45.10
    (Incl. Tax: €55.02)
  18. MXL CARMEX Micro Bareno sinistri per tornitura posteriore Tiny Tools in metallo duro non rivestito K20, rivestito BXC o BMK, fantina mobile, selezionare la dimensione d1 per il foro e L1 per la profondità

    MXL CARMEX Small boring Tiny Tools lefth version for back turning full carbide uncoated K20, coated BMK and BXC, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    As low as €51.60
    (Incl. Tax: €62.95)
  19. MPR CARMEX Small boring Tiny Tools right version for profiling and boring, full carbide uncoated K20, coated BMK and BXC, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    MPR CARMEX Small boring Tiny Tools right version for profiling and boring, full carbide uncoated K20, coated BMK and BXC, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    As low as €45.10
    (Incl. Tax: €55.02)
  20. MPL CARMEX Small boring Tiny Tools left version for profiling and boring, full carbide uncoated K20, coated BMK and BXC, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    MPL CARMEX Small boring Tiny Tools left version for profiling and boring, full carbide uncoated K20, coated BMK and BXC, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    As low as €45.10
    (Incl. Tax: €55.02)
  21. Small boring right version for internal profiling and 90°face cutting Tiny Tools Carmex Swiss Type

    MUR CARMEX Small boring right version for internal profiling and 90°face cutting Tiny Tools Carmex Swiss Type

    As low as €45.10
    (Incl. Tax: €55.02)
  22. MUL CARMEX Micro Bareni sinistri per per profilatura interna e taglio frontale a 90° Tiny Tools in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    MUL CARMEX Small boring left version for internal profiling and 90°face cutting Tiny Tools full carbide uncoated K20, coated BMK and BXC, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    As low as €45.10
    (Incl. Tax: €55.02)
  23. MQR CARMEX Micro Bareni destri Tiny Tools per barenatura e profilatura interna in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    MQR CARMEX Small boring Tiny Tools right version for profiling and boring, full carbide uncoated K20, coated BMK and BXC, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    As low as €46.20
    (Incl. Tax: €56.36)
  24. MQL CARMEX Micro Bareni sinistri Tiny Tools per barenatura e profilatura interna in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    MQL CARMEX Small boring Tiny Tools left version for profiling and boring, full carbide uncoated K20, coated BMK and BXC, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    As low as €46.20
    (Incl. Tax: €56.36)
  25. MFL Micro Bareni destri per scanalatura frontale per esecuzione gole aventi ingombri esterni frontale con esecuzione all'interno del foro Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, scegliere d1 e L1

    MFL Micro Bareni destri per scanalatura frontale per esecuzione gole aventi ingombri esterni frontale con esecuzione all'interno del foro Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, scegliere d1 e L1

    As low as €51.60
    (Incl. Tax: €62.95)
  26. MVR Micro Bareni destri per scanalatura frontale profonda con partenza da faccia piena Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    MVR Micro Bareni destri per scanalatura frontale profonda con partenza da faccia piena Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    As low as €70.70
    (Incl. Tax: €86.25)
  27. MVL Micro Bareni sinistri per scanalatura frontale profonda con partenza da faccia piena Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    MVL Micro Bareni sinistri per scanalatura frontale profonda con partenza da faccia piena Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    As low as €70.70
    (Incl. Tax: €86.25)
  28. MZR Micro Bareni destri per scanalatura frontale raggiata con esecuzione all'interno del foro Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    MZR Micro Bareni destri per scanalatura frontale raggiata con esecuzione all'interno del foro Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    As low as €51.60
    (Incl. Tax: €62.95)
  29. MZL Micro Bareni sinistri per scanalatura frontale raggiata con esecuzione all'interno del foro Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    MZL Micro Bareni sinistri per scanalatura frontale raggiata con esecuzione all'interno del foro Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    As low as €51.60
    (Incl. Tax: €62.95)
  30. MGL mall boring Tiny Tools right version for grooving Carmex full carbide uncoated K20, coated BMK and BXC, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    MGL mall boring Tiny Tools right version for grooving Carmex full carbide uncoated K20, coated BMK and BXC, Swiss Type machines, choose Dimension d1 for the hole and L1 for the depth

    As low as €50.00
    (Incl. Tax: €61.00)
  31. MKR Micro Bareni destri per gole con scanalatura raggiata Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    MKR Micro Bareni destri per gole con scanalatura raggiata Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    As low as €51.60
    (Incl. Tax: €62.95)
  32. MKL Micro Bareni destri per gole con scanalatura raggiata Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    MKL Micro Bareni destri per gole con scanalatura raggiata Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    As low as €51.60
    (Incl. Tax: €62.95)
  33. MGR Micro Bareni destri per scanalatura Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    MGR Micro Bareni destri per scanalatura Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    As low as €50.00
    (Incl. Tax: €61.00)
  34. MFR Micro Bareni destri per scanalatura frontale con esecuzione all'interno del foro Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    MFR Micro Bareni destri per scanalatura frontale con esecuzione all'interno del foro Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    As low as €51.60
    (Incl. Tax: €62.95)
  35. MFLCSX Micro Bareni destri per scanalatura frontale con rompitruciolo per esecuzione all'interno del foro Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    MFLCSX Micro Bareni destri per scanalatura frontale con rompitruciolo per esecuzione all'interno del foro Tiny Tools Carmex in metallo duro non rivestito K20, rivestito BXC o BMK, selezionare la dimensione d1 per il foro e L1 per la profondità

    As low as €56.70
    (Incl. Tax: €69.17)
  36. CARMEX Right-hand insert Swiss line in micro-grain coated carbide BLU, size 25, for snap ring grooves DIN 471-472 on shafts, machined by plunge cutting on CNC lathes and with sliding headstock, elastic ring thickness of your choice

    CARMEX Right-hand insert Swiss line in micro-grain coated carbide BLU, size 25, for snap ring grooves DIN 471-472 on shafts, machined by plunge cutting on CNC lathes and with sliding headstock, elastic ring thickness of your choice

    As low as €46.40
    (Incl. Tax: €56.61)
  37. CARMEX Right hand Swiss line K20 micrograin inserts size 25 for snap ring seat DIN 471-472 for shafts run plunge on CNC and sliding headstock lathes snap ring thickness of your choice

    CARMEX Right hand Swiss line K20 micrograin inserts size 25 for snap ring seat DIN 471-472 for shafts run plunge on CNC and sliding headstock lathes snap ring thickness of your choice

    As low as €44.10
    (Incl. Tax: €53.80)
  38. CARMEX Right-hand insert Swiss line in micro-grain coated carbide GX7, size 25, for snap ring grooves DIN 471-472 on shafts, machined by plunge cutting on CNC lathes and with sliding headstock, elastic ring thickness of your choice

    CARMEX Right-hand insert Swiss line in micro-grain coated carbide GX7, size 25, for snap ring grooves DIN 471-472 on shafts, machined by plunge cutting on CNC lathes and with sliding headstock, elastic ring thickness of your choice

    As low as €46.40
    (Incl. Tax: €56.61)
  39. CARMEX Left hand Swiss line K20 micrograin inserts size 25 for snap ring seat DIN 471-472 for shafts run plunge on CNC and sliding headstock lathes snap ring thickness of your choice

    CARMEX Left hand Swiss line K20 micrograin inserts size 25 for snap ring seat DIN 471-472 for shafts run plunge on CNC and sliding headstock lathes snap ring thickness of your choice

    As low as €44.10
    (Incl. Tax: €53.80)
  40. CARMEX Left hand Swiss line left insert made of GX7-coated hard metall micrograin, size 25, for snap ring groove DIN 471-472 for shafts performed plunge on CNC and sliding headstock lathes snap ring thickness of your choice

    CARMEX Left hand Swiss line left insert made of GX7-coated hard metall micrograin, size 25, for snap ring groove DIN 471-472 for shafts performed plunge on CNC and sliding headstock lathes snap ring thickness of your choice

    As low as €46.40
    (Incl. Tax: €56.61)
  41. CARMEX Left hand Swiss Left-hand insert Swiss line in micro-grain coated carbide BLU, size 25, for snap ring grooves DIN 471-472 on shafts, machined by plunge cutting on CNC lathes and with sliding headstock, elastic ring thickness of your choice

    CARMEX Left hand Swiss Left-hand insert Swiss line in micro-grain coated carbide BLU, size 25, for snap ring grooves DIN 471-472 on shafts, machined by plunge cutting on CNC lathes and with sliding headstock, elastic ring thickness of your choice

    As low as €46.40
    (Incl. Tax: €56.61)
  42. CARMEX Coated GX7 left-handed Swiss Line micrograin PVD insert sizes 40 and 25 for performing groove turning on CNC lathes and with live tooling, with width of your choice

    CARMEX Coated GX7 left-handed Swiss Line micrograin PVD insert sizes 40 and 25 for performing groove turning on CNC lathes and with live tooling, with width of your choice

    As low as €44.20
    (Incl. Tax: €53.92)
  43. CARMEX Coated GX7 right-handed Swiss Line micrograin PVD insert sizes 40 and 25 for performing groove turning on CNC lathes and with live tooling, with width of your choice

    CARMEX Coated GX7 right-handed Swiss Line micrograin PVD insert sizes 40 and 25 for performing groove turning on CNC lathes and with live tooling, with width of your choice

    As low as €44.20
    (Incl. Tax: €53.92)
  44. CARMEX Coated insert BLUE left-hand Swiss line in micrograin PVD sizes 40 and 25 for plunge groove execution, CNC lathes and Swiss-type machines with width of your choice

    CARMEX Coated insert BLUE left-hand Swiss line in micrograin PVD sizes 40 and 25 for plunge groove execution, CNC lathes and Swiss-type machines with width of your choice

    As low as €44.20
    (Incl. Tax: €53.92)
  45. CARMEX Coated insert BLUE Right-hand Swiss line in micrograin PVD sizes 40 and 25 for plunge groove execution, CNC lathes and Swiss-type machines with width of your choice

    CARMEX Coated insert BLUE Right-hand Swiss line in micrograin PVD sizes 40 and 25 for plunge groove execution, CNC lathes and Swiss-type machines with width of your choice

    As low as €44.20
    (Incl. Tax: €53.92)
  46. 2SLGLWK CARMEX Left-hand Inserts Swiss line in micrograin K20 sizes 40 and 25 for plunging grooves execution on CNC lathes and sliding headstock, width to choice

    CARMEX Left-hand Inserts Swiss line in micrograin K20 sizes 40 and 25 for plunging grooves execution on CNC lathes and sliding headstock, width to choice

    As low as €42.00
    (Incl. Tax: €51.24)
  47. CARMEX Right-hand Inserts Swiss line in micrograin K20 sizes 40 and 25 for plunging grooves execution on CNC lathes and sliding headstock, width of your choice

    CARMEX Right-hand Inserts Swiss line in micrograin K20 sizes 40 and 25 for plunging grooves execution on CNC lathes and sliding headstock, width of your choice

    As low as €42.00
    (Incl. Tax: €51.24)
  48. SIM0025H5M Toolholder Carmex shank Ø25 for inside tourning tool size Ø5

    SIMH3C Toolholders Tiny Tools Carmex for inside tourning tool size Ø3

    As low as €143.20
    (Incl. Tax: €174.70)
View as Grid List

Items 1-48 of 63

Set Descending Direction
per page
Page
Shop By filter
Shopping Options
Category
Brand
Type of work
Application
Work material (ISO)
Cutting Material
Typology
Diameter "d1" mm
Lengt "L1"
Size
Dimension
Length "L"
Angle "C"
Dimension "X"
Diameter "D" mm
Width "W"
Price