Language

Hello Guest!
Your Cart 0
€0.00

Rotaring live centre

ROTATING TAILSTOCKS FOR DIFFERENT APPLICATIONS

To optimize the choice of a rotary tailstock, bear in mind that its function mainly consists in keeping the piece in axis during machining, preventing it from rotating off axis, causing vibrations, turning with roundness errors, surface with excessive roughness, short life of the tool that performs the machining. But the reason that makes it more important in its use consists in preventing the piece from swinging from its center until it comes out of the chuck jaws, therefore without control it can cause damage to the machine tool, but even worse the piece out of control can hit and seriously injure the operator on board the machine.

How to choose a rotary tailstock for the lathe

Rotary tailstocks must be chosen according to the following parameters:

- Type of shank or attachment

- Mass of the piece

- Rotation of the piece during machining

- Precision cylindricity of the piece

- Precision roundness of the piece

- Quantity of pieces to be produced

- In case of difficult pieces and long shafts, choose whether it should also be used as a drag

- Choice of the correct tip based on the size of the tool

Preparation of the piece for the insertion of the rotating tailstock

- Drill a hole with a center bit having a countersink angle equal to the angle we used for the cusp

- If it is inserted in a hole, choose the cusp based on the chamfer created at the beginning of the hole

 

Scheduled maintenance of the rotating tailstock

Live centers should still be checked between uses for radial or axial play in the precision bearings. When replacing the bearings, also replace any axial compensation springs.

View as List Grid

Items 1-10 of 282

Set Descending Direction
per page
Page
  1. 172.308 Rotating live centre with cylindrical shank Ø8 and compression stroke 2mm for single and multi-spindle lathes with standard interchangeable insert 60°

    Rotary live centres with cylindrical fitting shank and 2mm stroke compression mounted on mechanical or CNC single and multi-spindle lathes. The live centers are produced with certified top qality steel, they are hardened and completely grinded. Supplied complete with a "Standard" 60° interchangeable center.

    Learn More
    €200.00
    (Incl. Tax: €244.00)
  2. 172.310 Rotating live centre with cylindrical shank Ø10 and compression stroke 2mm for single and multi-spindle lathes with standard interchangeable insert 60°

    Rotary live centres with cylindrical fitting shank and 2mm stroke compression mounted on mechanical or CNC single and multi-spindle lathes. The live centers are produced with certified top qality steel, they are hardened and completely grinded. Supplied complete with a "Standard" 60° interchangeable center. Interchangeable cusps of various models are available for machining different parts.

     

    Learn More
    €200.00
    (Incl. Tax: €244.00)
  3. 172.312 Rotating live centre with cylindrical shank Ø12 and compression stroke 2mm for single and multi-spindle lathes with standard interchangeable insert 60°

    Rotary live centres with cylindrical fitting shank and 2mm stroke compression mounted on mechanical or CNC single and multi-spindle lathes. The live centers are produced with certified top qality steel, they are hardened and completely grinded. Supplied complete with a "Standard" 60° interchangeable center.

    Interchangeable cusps of various models are available for machining different parts.

    FOR MORE ROTATING LIVE CENTRES CLICK HERE

    The dimensions correspond to the product selected, but the drawing and images shown are indicative and not proportional.

    Learn More
    €200.00
    (Incl. Tax: €244.00)
  4. 172.314 Rotating live centre with cylindrical shank diameter 14mm and compression stroke 2mm for single and multi-spindle lathes with standard interchangeable insert 60 degrees

    Rotary live centres with cylindrical fitting shank and 2mm stroke compression mounted on mechanical or CNC single and multi-spindle lathes. The live centers are produced with certified top qality steel, they are hardened and completely grinded. Supplied complete with a "Standard" 60° interchangeable center. Interchangeable cusps of various models are available for machining different parts.

     

    Learn More
    €200.00
    (Incl. Tax: €244.00)
  5. 172.316 Rotating live centre with cylindrical shank diameter 16mm and compression stroke 2mm for single and multi-spindle lathes with standard interchangeable insert 60°

    Rotary live centres with cylindrical fitting shank and 2mm stroke compression mounted on mechanical or CNC single and multi-spindle lathes. The live centers are produced with certified top qality steel, they are hardened and completely grinded. Supplied complete with a "Standard" 60° interchangeable center.

    Interchangeable cusps of various models are available for machining different parts.

    FOR MORE ROTATING LIVE CENTRES CLICK HERE

    The dimensions correspond to the product selected, but the drawing and images shown are indicative and not proportional.

    Learn More
    €200.00
    (Incl. Tax: €244.00)
  6. 172.319 Rotating live centre with cylindrical shank diameter 19.05mm and compression stroke 2mm for single and multi-spindle lathes with standard interchangeable insert 60°

    Rotary live centres with cylindrical fitting shank and 2mm stroke compression mounted on mechanical or CNC single and multi-spindle lathes. The live centers are produced with certified top qality steel, they are hardened and completely grinded. Supplied complete with a "Standard" 60° interchangeable center.

    Interchangeable cusps of various models are available for machining different parts.

    FOR MORE ROTATING LIVE CENTRES CLICK HERE

    The dimensions correspond to the product selected, but the drawing and images shown are indicative and not proportional.

    Learn More
    €200.00
    (Incl. Tax: €244.00)
  7. 172.320 Rotating live centre with cylindrical shank diameter 20mm and compression stroke 2mm for single and multi-spindle lathes with standard interchangeable insert 60 degrees

    Rotary live centres with cylindrical fitting shank and 2mm stroke compression mounted on mechanical or CNC single and multi-spindle lathes. The live centers are produced with certified top qality steel, they are hardened and completely grinded. Supplied complete with a "Standard" 60° interchangeable center.

    Interchangeable cusps of various models are available for machining different parts.

    FOR MORE ROTATING LIVE CENTRES CLICK HERE

    The dimensions correspond to the product selected, but the drawing and images shown are indicative and not proportional.

    Learn More
    €200.00
    (Incl. Tax: €244.00)
  8. 172.322 Rotating live centre with cylindrical shank diameter 22mm and compression stroke 2mm for single and multi-spindle lathes with standard interchangeable insert 60 degrees

    Rotary live centres with cylindrical fitting shank and 2mm stroke compression mounted on mechanical or CNC single and multi-spindle lathes. The live centers are produced with certified top qality steel, they are hardened and completely grinded. Supplied complete with a "Standard" 60° interchangeable center.

    Interchangeable cusps of various models are available for machining different parts.

    FOR MORE ROTATING LIVE CENTRES CLICK HERE

    The dimensions correspond to the product selected, but the drawing and images shown are indicative and not proportional.

    Learn More
    €200.00
    (Incl. Tax: €244.00)
  9. 172.325 Rotating live centre with cylindrical shank diameter 25mm and compression stroke 2mm for single and multi-spindle lathes with standard interchangeable insert 60 degrees

    Rotary live centres with cylindrical fitting shank and 2mm stroke compression mounted on mechanical or CNC single and multi-spindle lathes. The live centers are produced with certified top qality steel, they are hardened and completely grinded. Supplied complete with a "Standard" 60° interchangeable center.

    Interchangeable cusps of various models are available for machining different parts.

    FOR MORE ROTATING LIVE CENTRES CLICK HERE

    The dimensions correspond to the product selected, but the drawing and images shown are indicative and not proportional.

    Learn More
    €200.00
    (Incl. Tax: €244.00)
  10. 172.326 Rotating live centre with cylindrical shank Ø25.40 and compression stroke 2mm for single and multi-spindle lathes with standard interchangeable insert 60°

    Rotary live centres with cylindrical fitting shank and 2mm stroke compression mounted on mechanical or CNC single and multi-spindle lathes. The live centers are produced with certified top qality steel, they are hardened and completely grinded. Supplied complete with a "Standard" 60° interchangeable center.

    Interchangeable cusps of various models are available for machining different parts.

    FOR MORE ROTATING LIVE CENTRES CLICK HERE

    The dimensions correspond to the product selected, but the drawing and images shown are indicative and not proportional.

    Learn More
    €200.00
    (Incl. Tax: €244.00)
View as List Grid

Items 1-10 of 282

Set Descending Direction
per page
Page