The OMCN SL/15 foldable hydraulic workshop crane is a professional lifting device designed for controlled lifting, handling and positioning of heavy loads up to 1500 kg. It is suitable for mechanical workshops, maintenance departments, automotive repair shops, body shops, assembly companies, heavy-duty workshops and industrial environments where engines, gearboxes, gear motors, pumps, moulds, equipment and mechanical assemblies must be moved more safely than with manual lifting, unsuitable hoists or improvised systems.

The SL/15 model offers higher capacity than more compact workshop cranes and is designed for operations where the weight of the component requires a stronger structure and a greater lifting reserve. The extendable boom has four working positions, allowing the reach to be adapted to the operation. The lifting capacity changes according to the selected position: 1500 kg in the shortest configuration, then 1200 kg, 800 kg and 500 kg in the extended positions. This is essential because lifting capacity decreases as the reach increases; before every operation, the operator must check the real load weight, boom position, centre of gravity and lifting point.

An important feature of the SL/15 model is its Euro Pallet compatibility, which is useful in workshops and production departments where components are handled on standard pallets. This makes it easier to approach the load and manage loading, unloading, positioning on pallets, preparation for shipment or internal transfer. Pallet compatibility does not remove the need to always check manoeuvring space, load stability and floor suitability.

The construction layout highlights a ground and chrome-plated ram, designed to ensure long-term reliability and smooth movement during lifting. The two-speed hydraulic pump allows a faster approach phase and a more controlled lifting phase once the load is engaged. The controlled lowering command allows the component to be lowered accurately, avoiding sudden movements when placing it on pallets, trolleys, benches, supports or mounting seats.

The adjustable boom is one of the main strengths of this workshop crane. In the shortest position, the maximum capacity is available and stability is higher, while the extended positions allow the operator to reach more distant points, for example inside a machine, over a pallet or in an area that is not directly accessible. A practical recommendation is to always choose the shortest possible boom position compatible with the operation, keeping the load as close as possible to the crane column. This reduces stress on the structure, limits load swing and improves overall safety.

The 360° swivel hook makes it easier to orient the load during hooking, lifting and positioning. It is particularly useful when handling engines, gearboxes, reducers, pumps, moulds, equipment or mechanical assemblies with lifting points that are not perfectly aligned. The hook must always work correctly in tension and must not be subjected to side loads. For safe use, suitable lifting accessories must be used, such as chains, slings, eye bolts, shackles, lifting beams, specific hooks or gripping systems designed for the weight and geometry of the component.

The built-in overload protection valve increases operational safety, but it does not replace the operator’s technical checks. The load must always remain within the capacity allowed for the selected boom position. Before lifting, it is advisable to check that the boom pins are correctly inserted, the load is balanced, the accessories are undamaged, the floor is flat and strong enough and the handling path is free from obstacles. A hydraulic workshop crane must be used for lifting and positioning, not for pulling the load sideways.

The rear swivel wheels improve manoeuvrability during movement, while the polyurethane wheels are suitable for appropriate industrial floors and help handle heavy loads more smoothly. During transport, the load must remain low, stable and as close as possible to the structure. A practical tip used by experienced fitters is to lift the component only enough to clear the support, move it slowly and stop immediately if it starts to swing, rotate or tilt.

In the automotive sector, the OMCN SL/15 crane is suitable for removing and installing engines, gearboxes, axles, suspension units and heavy components. In maintenance departments, it can be used to handle gear motors, pumps, cylinders, equipment, machine tool parts, supports, guards and assembled units. In assembly companies and industrial workshops, it is useful for loading or unloading components from pallets, positioning heavy parts on workbenches and reducing the operator’s physical effort.

For correct operation, the working area should always be prepared before lifting. The support point must be clear, stable and ready to receive the component. This reduces the time during which the load remains suspended. If the part must be inserted into a seat or coupled to a machine, lowering must be slow and controlled, avoiding impacts or forced corrections. When the load is bulky or unbalanced, it is better to use a lifting beam or multiple lifting points to keep the component in the correct position.

The OMCN SL/15 foldable hydraulic workshop crane is therefore a robust and flexible solution for workshops and technical departments requiring high lifting capacity and controlled handling. Its 1500 kg maximum capacity, adjustable boom, Euro Pallet compatibility, two-speed pump, swivel hook, controlled lowering, overload protection valve, side tie rods and polyurethane wheels make it suitable for a wide range of professional applications. Dedicated lifting accessories may be required to perform all operations completely and safely, depending on the component to be handled.