The OMCN SL/20 foldable hydraulic workshop crane is a high-capacity professional lifting device designed for controlled lifting, handling and positioning of loads up to 2000 kg. It is suitable for mechanical workshops, maintenance departments, automotive repair shops, body shops, assembly companies, heavy-duty workshops and industrial environments where engines, gearboxes, gear motors, pumps, moulds, mechanical assemblies, equipment and heavy metal components must be moved more safely than with manual lifting, unsuitable hoists or improvised systems.

The SL/20 model is designed for operations requiring greater capacity and a stronger structure than smaller workshop cranes. The extendable boom has four working positions, allowing the reach to be adapted to the specific operation. Lifting capacity changes according to the selected position: 2000 kg in the shortest configuration, then 1500 kg, 1000 kg and 600 kg in the extended positions. This is essential because capacity decreases as the reach increases; before every operation, the operator must check the actual load weight, boom position, centre of gravity and lifting point.

Euro Pallet compatibility is an important feature for workshops and production departments, as it allows easier access to loads placed on standard pallets. This helps with loading, unloading, internal transfer, shipment preparation and positioning of components on pallets or workstations. Pallet compatibility does not remove the need to verify load stability, manoeuvring space and floor suitability before use.

The construction layout highlights a ground and chrome-plated ram, designed to ensure long-term reliability and smooth movement during lifting and lowering. The two-speed hydraulic pump allows a faster approach phase and a more controlled lifting phase once the load is engaged. The controlled lowering command allows the component to be lowered precisely, avoiding impacts, swinging and sudden contact with pallets, trolleys, benches, supports or mounting seats.

The adjustable boom with four positions allows the operator to choose the best balance between capacity and working distance. The shortest position provides maximum capacity and greater stability, while the extended positions allow more distant points to be reached, for example inside a machine, over a pallet or in areas that are not easily accessible. A practical recommendation is to use the minimum reach required for the operation, keeping the load as close as possible to the crane column. This reduces stress on the structure, limits swinging and improves overall safety.

The 360° swivel hook makes it easier to orient the load during hooking, lifting and positioning. This is useful when handling engines, gearboxes, moulds, pumps, reducers, equipment or mechanical assemblies with lifting points that are not perfectly aligned. The hook must always work correctly in tension and must not be subjected to side loads or abnormal twisting. For safe operation, suitable lifting accessories must be used, such as chains, slings, eye bolts, shackles, lifting beams, specific hooks or gripping systems sized according to the weight and geometry of the component.

The built-in overload protection valve contributes to operational safety, but it must not be considered a way to compensate for incorrect assessment. The lifting capacity must always be respected according to the selected boom position. Before lifting, it is advisable to check that the pins are correctly inserted, the load is balanced, the accessories are undamaged, the floor is flat and strong enough and the handling path is free from obstacles. The workshop crane must be used for lifting and positioning, not for pulling the load sideways.

The rear swivel wheels improve manoeuvrability, while the polyurethane wheels are suitable for appropriate industrial floors and help manage heavy loads more smoothly. During movement, the load must remain low, stable and as close as possible to the structure. A practical tip used by experienced fitters is to lift the component only enough to clear the support, move it slowly and stop immediately if the load starts to swing, rotate or tilt. If swinging occurs, it is better to lower the part again and correct the lifting point.

In the automotive sector, the OMCN SL/20 crane is suitable for removing and installing engines, gearboxes, axles, suspension units and heavy components. In maintenance departments, it can be used to handle gear motors, pumps, cylinders, moulds, machine tool parts, supports, guards and assembled units. In assembly companies and industrial workshops, it is useful for loading or unloading components from pallets, positioning heavy parts on workbenches and reducing physical effort during repetitive operations.

For correct operation, the working area should be prepared before lifting. The support point must be clear, stable and ready to receive the component, reducing the time during which the load remains suspended. If the part must be inserted into a seat, coupled to a machine or positioned between parts with limited clearance, lowering must be slow and controlled. When the load is bulky or unbalanced, it is better to use a lifting beam or multiple lifting points to keep the component in the correct position.

The OMCN SL/20 foldable hydraulic workshop crane is therefore a robust and flexible solution for workshops and technical departments requiring high lifting capacity and precise handling. Its 2000 kg maximum capacity, adjustable boom, Euro Pallet compatibility, two-speed pump, swivel hook, controlled lowering, overload protection valve, side tie rods and polyurethane wheels make it suitable for a wide range of professional applications. Dedicated lifting accessories may be required to perform all operations completely and safely, depending on the component to be handled.