The ASTURO 1 AM pneumatic agitator, item 0205000, is a technical accessory designed for mixing and keeping coating products, enamels, primers, fillers and liquid materials in motion in professional coating systems. Its function is to keep the product homogeneous inside the tank, reducing the risk of sedimentation, phase separation, viscosity variation and uneven material consistency that could compromise application quality. It is recommended for tanks up to 40 litres and is suitable for workshops, body shops, finishing departments and industrial applications where the product must remain uniform during the working cycle.

The image shows that the agitator is supplied complete with support, propeller speed regulator, stainless steel shaft and stainless steel propeller. The support allows the agitator to be positioned practically in relation to the tank, while the shaft and propeller transfer movement to the material being mixed. Stainless steel is suitable for this type of application because it offers good resistance in contact with compatible liquid and coating products, facilitates cleaning and contributes to the durability of components immersed in the material.

The propeller speed regulator allows agitation to be adapted to the type of product used. More fluid materials require gentler mixing, while denser products, primers, fillers or materials containing solid components may require more energetic movement to maintain homogeneity and stability. Correct adjustment is important to avoid foam formation, air incorporation, excessive turbulence or insufficient mixing. Speed control therefore helps the operator achieve more stable preparation consistent with the spraying or application process.

The pneumatic agitator can be used during product preparation and, when the system configuration allows it, also during the working cycle to keep the mixture constant inside the tank. This is particularly useful with paints, primers, enamels, two-component products or materials that tend to separate when left still. Keeping the product properly agitated contributes to more regular supply to the pump or spray gun and helps reduce colour differences, coverage variations, finishing defects and deposits at the bottom of the container.

The easy disassembly and possible manual use make the product practical for maintenance, cleaning and adaptation to different workstations. Before use, it is important to check that the agitator is correctly fixed, the propeller is free to rotate, it does not touch the tank walls or bottom and the product level is adequate. Correct positioning helps avoid vibrations, impacts, abnormal noise or uneven mixing. It is also advisable to start agitation gradually, increasing the speed only after checking system stability.

For this product, precision and adjustment do not refer to dimensional measurement or metrological resolution, but to control of the mixing process. Operational precision means maintaining product homogeneity, adjusting propeller speed according to viscosity and ensuring uniform distribution of the components inside the tank. Heights, transmission play and geometric errors are not measured directly, but correct mixing can contribute to process stability and final surface quality.

In industrial environments, the ASTURO 1 AM is suitable for body shops, workshops, the wood industry, coating departments, industrial maintenance and work on metal, plastic and technical components. It can be used with tanks and spraying systems where the material must be kept uniform before being supplied to the gun or pump. It is useful both in routine maintenance and in production cycles, especially when product consistency is essential for regular and repeatable finishes.

To keep the agitator efficient over time, the shaft and propeller should be cleaned thoroughly after every use, preventing dried or hardened residues from affecting rotation and mixing quality. The image also indicates that the motor must be lubricated regularly: this maintenance is important to preserve correct pneumatic motor operation, reduce wear, avoid seizure and ensure operating continuity. The ASTURO 1 AM pneumatic agitator is therefore a practical and professional solution for keeping coating material stable and homogeneous in tanks up to 40 litres.