The ASTURO paint suction system for K24 inox, item 0060012I, is a technical accessory designed to feed the pump during professional coating applications. Its function is to draw coating material from the product container or working tank and convey it to the K24 inox pump through a line consisting of a flexible hose, metal fittings and suction end. It is useful when the operator needs to keep the supply system organised, stable and consistent with the spraying equipment in use.

The image shows a configuration with flexible hose, connection fittings and metal suction tube. This structure allows the suction end to be positioned inside the product container and the line to be connected to the pump in a practical way. The flexible hose makes the workstation easier to manage and allows a more convenient connection between the product pickup point and the pump. The metal fittings contribute to connection stability and must be assembled correctly to ensure sealing and continuous supply.

The system is suitable for coating materials, primers, fillers, enamels, protective products and sprayable materials compatible with the pump and system configuration. In body shops, workshops, finishing departments or industrial maintenance, correct product suction is essential for regular supply and for reducing interruptions during application. A properly installed suction line helps keep the flow towards the pump more stable, limiting pickup problems, discontinuity and possible delivery defects.

Before use, compatibility with the K24 inox pump should be checked, together with the condition of the hose and fittings. The operator should ensure that there are no bends, crushing points, obstructions or damage and that the suction end is correctly positioned in the product. Incorrect installation may cause irregular suction, air intake, flow drops, feeding difficulties or interruptions in the coating process. Careful installation is therefore essential to use the system correctly.

In professional environments, the suction system for K24 inox can be used in coating stations for metal, wood, plastic, industrial components, structures, panels, automotive parts and technical surfaces. It is suitable both for continuous work cycles and for maintenance or restoration operations where the pump must be reliably supplied from the product container. The flexible hose configuration makes it practical for operators who need to adapt the workstation to the job requirements and container layout.

The precision of this product is not related to dimensional measurement, metrological resolution, heights, transmission play or geometric errors, but to the functional quality of supply. In this context, precision means suction continuity, flow stability, fitting sealing and correct positioning of the suction end. These aspects directly affect spraying regularity, because a pump supplied discontinuously can generate flow variations, application instability and finishing defects.

To keep the system efficient, the hose, fittings and suction end should be cleaned after use according to the coating material applied. Dried residues, deposits or hardened material can reduce passage, compromise suction and make pump feeding less stable. It is also advisable to periodically check for wear, cuts, swelling or leaks along the hose and replace the component if it no longer ensures proper sealing. The ASTURO paint suction system for K24 inox is therefore a practical and important accessory for correctly feeding the pump and supporting professional coating applications with greater operating continuity.