The ASTURO MF 16x1.5 stainless steel fitting with pressure gauge is a professional accessory for pumps and spraying systems, designed to connect the material circuit and provide direct monitoring of working pressure. It is suitable for airless systems, coating pumps, material feeding lines and technical applications where pressure must be clearly checked during start-up, adjustment, continuous operation and maintenance. The integrated analogue pressure gauge allows the operator to read the pressure value and adjust the pump with greater accuracy.

The image shows a metal fitting with MF 16x1.5 male/female threaded connections, combined with an analogue pressure gauge with bar and psi scales. The dial allows pressure reading up to approximately 400 bar / 6000 psi, a range consistent with high-pressure circuits typically used in airless applications and professional spraying systems. The compact design allows installation along the material line, near the pump or at a useful point in the circuit where actual operating pressure must be monitored.

This fitting with pressure gauge is particularly useful when working with paints, primers, undercoats, fillers, enamels, protective coatings, waterproofing products and technical materials that require stable pressure to obtain regular spraying. Pressure that is too low can cause an irregular spray fan, streaking, poor coverage or insufficient atomisation; pressure that is too high can increase overspray, material consumption, nozzle wear and stress on the circuit. Gauge reading therefore helps keep the process under control and supports more repeatable working conditions.

During installation, it is important to check the compatibility of the MF 16x1.5 thread with the system components, verify connection sealing and make sure the circuit is suitable for the expected working pressure. Before start-up, the gauge should be checked to ensure that it is undamaged, readable and safely positioned so that the operator can consult it without exposure to hazardous areas. During spraying, the displayed pressure value should be evaluated together with product viscosity, nozzle diameter, required flow rate, hose length and the technical recommendations of the pump and coating material used.

For technicians and maintenance operators, this accessory is also useful as a diagnostic element in the system. Abnormal fluctuations, sudden pressure drops or values inconsistent with the selected setting may indicate clogged filters, worn or partially blocked nozzles, air in the circuit, leaks, irregular suction, incorrectly filtered material or pump adjustment problems. Pressure monitoring therefore helps identify the causes of application defects more quickly and reduces downtime, rework and material waste.

In this product, precision refers to pressure reading and pressure control, not to dimensional measurement, height inspection, transmission play or geometric error analysis. Coating quality depends on a combination of parameters: pressure, viscosity, nozzle, spray distance, pass speed, material filtration and substrate preparation. The fitting with pressure gauge allows one of these essential parameters to be monitored and contributes to a more stable spray fan, better film uniformity and greater repeatability of the final result.

The product is suitable for body shops, industrial maintenance, coating departments, workshops, automotive companies, metal fabrication, machine tools, steel structures, panels, mechanical components and technical surfaces. To keep the accessory efficient over time, the circuit should be cleaned after use, residues inside the fitting should be avoided, pressure limits should not be exceeded and the condition of threads, seals and the pressure gauge dial should be checked periodically. The ASTURO MF 16x1.5 stainless steel fitting with pressure gauge is therefore a simple but important component for improving control, safety and application quality in professional spraying systems.