The TWG 1 H parts cleaning cabinet is a professional enclosed solution for cleaning, washing and blow-off of mechanical components, tools, spare parts, metal parts and items contaminated with oil, grease, machining residues, dust, chips or workshop dirt. It is designed for mechanical workshops, maintenance departments, vehicle repair shops, technical laboratories and industrial environments where parts must be cleaned in an orderly, controlled and safer way than with open manual washing.

The TWG 1 H model operates with 230 V power supply and ~50 Hz frequency. The cabinet volume is 140 l and the internal dimensions are 736 x 560 x 450 mm. These specifications allow a wide variety of components to be processed within the internal grid load limit of 40 kg. The external dimensions of 790 x 610 x 1,260 mm allow the cabinet to be integrated into workshops, maintenance departments and dedicated washing stations while keeping a compact footprint in relation to its useful capacity.

The digital temperature control allows the solvent or cleaning fluid temperature to be set precisely. This function is important because temperature directly affects cleaning efficiency, grease and oil removal and process speed. Correct temperature adjustment helps improve washing quality and makes results more repeatable, especially when similar parts are cleaned continuously.

The cabinet is equipped with a large smooth-running sliding lid designed for quick and easy loading and unloading of components. This feature makes it easier to insert bulky or irregular parts and allows the operator to work more practically. Before cleaning, the part should be positioned stably on the internal grid, avoiding unstable support, overloads or components that may move during treatment.

Work area visibility is ensured by internal lighting and a large safety viewing window. The operator can visually check the condition of the part, correctly direct the gun and monitor cleaning progress without repeatedly opening the cabinet. This improves ease of use and reduces dispersion of vapours, splashes or residues into the working environment.

The integrated pneumatic gun is designed for efficient cleaning and drying by blow-off. Operating pressure is 5 - 8 bar, with 140 l/min air flow and 1/4" compressed air connection. The dual cleaning and drying function allows dirt, residues and cleaning fluid to be removed from surfaces, cavities, holes, grooves and less accessible areas of the components. The integrated compressed air connection provides reliable air supply, provided that the compressed air system is correctly sized.

The detergent flow rate is 0.8 l/min and the detergent tank capacity is 8 - 14 l. These values allow the washing cycle to be managed with an appropriate quantity of product, avoiding waste and ensuring operating continuity. Cleaning agents or solvents must be compatible with the machine, the component material and company safety procedures.

Operational safety is supported by automatic shutdown in case of low solvent level or open lid. This function protects the system and reduces the risk of improper use, dry running or operation in unsuitable conditions. The lid must be closed during operation and the detergent level must be checked regularly to maintain constant performance.

In mechanical workshops, the cabinet can be used to clean machined parts, tools, clamping devices, machine parts and maintenance components. In the automotive sector it is useful for spare parts, brackets, small mechanical assemblies and parts removed during repairs. In industrial departments it can support preventive and extraordinary maintenance, preparing components for inspection, lubrication, replacement or reassembly.

For good results, it is advisable to remove coarse residues first, position the part stably, correctly adjust the temperature, work with the gun at a suitable distance and use blow-off to remove residual liquid from cavities and surfaces. After washing, components should be dried and checked before reassembly, especially if they have blind holes, threads, bearing seats or areas where detergent may remain trapped.

Cabinet maintenance should include periodic checking of detergent level and condition, grid cleaning, inspection of the pneumatic gun, lighting, safety window, sliding lid, hand access openings, air connections and 2 m power cable. The Ø 100 mm hand access opening allows operational access to the washing area and must be kept intact and clean to ensure comfort and safety during use.

The TWG 1 H parts cleaning cabinet is therefore a professional solution for users who need to wash and blow off components efficiently, in a controlled and safe way. The combination of 140 l cabinet volume, 8 - 14 l detergent capacity, 0.8 l/min flow rate, 40 kg internal grid load, digital temperature control, pneumatic gun, 5 - 8 bar pressure, internal lighting, large safety window, automatic shutdown and compact structure makes it suitable for workshops, industrial maintenance, vehicle repair, assembly and technical laboratories.