PCE Instruments PCE-RCD 1 Tester for rapid detection of RCDs, selection of test currents, measurement of trip current and reaction time
In stock
SKU
PCE-RCD-1
€175.47
(Incl. Tax: €214.07)
(Incl. Tax: €214.07)
The PCE-RCD 1 tester is an advanced tool for the rapid detection of RCDs, capable of determining the trip current and reaction time. With the selection of test currents, it offers great versatility in various contexts. It detects leakage currents, deactivating the power supply when necessary. The device allows for the adjustment of the type of RCD (normal or selective) and the mode for starting the test current. With a large color LCD display, it provides a quick assessment of the system's status and alerts with acoustic signals in case of anomalies such as overvoltage or lack of grounding.
Technical specifications:
| Display | 3 digits, backlit (blue and red) |
| RCD Types | Normal or selective RCD |
| Voltage range | 210 - 240V (phase to neutral) 50/60 Hz |
| Alarm | - Input voltage too high - Lack of ground connection - Earth potential above 50 V |
| Operating temperature | Operation: -15 - +45 ºC At rest: -25 - +70 ºC |
| Degree of protection | IP 40 |
| Weight | 340 g |
| Dimensions | 71 x210 x 51 mm |
| Diet | 4 x AA 1.5V Batteries |
| Regulations | EN 61010-1: CAT III 600V EN 61557-6 EN 61236 (EMC) |
The PCE-RCD 1 tester represents an advanced and indispensable tool for verifying the safety of electrical systems, specifically designed to measure the trip current and reaction time of RCDs. This highly specialized device offers a detailed analysis of the performance of leakage current protection systems, significantly contributing to ensuring the safety and reliability of electrical installations in various contexts.
One of the main features of this tester is its ability to adjust the test current up to a maximum of 650 mA, providing extensive flexibility for use in different situations. The operation is simple and quick; in fact, the tester allows easy selection of the necessary test current based on the specific requirements of the installation. During the test, the device allows leakage current to pass through the RCD and determines the intensity at which it reacts, allowing for an accurate and timely evaluation of the safety system's performance.
Using the PCE-RCD 1 tester is extremely intuitive, making it accessible even to less experienced professionals. In addition to adjusting the test current, it is possible to select the type of RCD, which can be either normal or selective, providing an additional level of customization for each measurement. Moreover, the device allows starting the test current with either a positive or negative half-wave, enabling specific tests based on the characteristics of the electrical installation being examined.
Once all parameters are set, the operator simply needs to press a button to start the measurement, greatly simplifying the verification process and saving valuable time. The large color LCD display provides a quick and clear view of the system's status, allowing operators to easily interpret the results of the measurements taken. The readability and clarity of the displayed information make the tester particularly effective even in low-light conditions, where visibility is crucial.
A critical aspect of the PCE-RCD 1 tester is its integrated alert system, which emits acoustic alarms in case of overvoltage, lack of grounding, or ground potential exceeding 50 V. This alert mechanism ensures continuous safety monitoring and enables operators to intervene promptly in case of anomalies, preventing potential safety risks for the installations.
The application of the tester is particularly useful in various fields, including industrial, commercial, and residential sectors. In fact, protection against leakage currents is vital for ensuring the safety of electrical installations, especially in environments where the presence of water or humidity can increase the risk of accidents. Compliance with safety standards, such as EN 61010-1 and CAT III 600V, ensures that the tester can be used in professional and safe work environments, providing peace of mind to engineers and electrical professionals.
In summary, the PCE-RCD 1 tester is an essential device for anyone working in the field of electrical safety. Thanks to its advanced functionalities and ease of use, it enables effective and reliable monitoring of installation safety, helping to optimize operational performance and ensuring a high level of protection for end-users. With this tool, professionals can tackle the most complex challenges in the electrical sector, ensuring high-quality results in all applications, whether in commercial or residential contexts.
Caratteristichs:
- Adjustment of the test current from mA to 650 mA
- Alarm when the maximum input voltage is exceeded, absence of ground connection, and ground potential above 50V
- Measure the trip time of the RCD (Residual Current Device)
- Status verification via display color
Delivery scope:
1 x PCE-RCD 1 System Tester
1 x Instructions for use
1 x Instructions for use
- EAN Code:
- 4250348710642
- Brand:
- PCE INSTRUMENTS
