Isolation test
Terminal voltage	125V (0 - 10%)
Measuring range	0.125 - 4 MΩ 4.001 - 40 MΩ 40.01 - 400 MΩ 400.1 - 1000 MΩ
Resolution	0.001 MΩ 0.01 MΩ 0.1 MΩ 1 MΩ
Accuracy	±(2% + 10 digits) ±(4% + 5 digits) ±(5% + 5 digits) ±(2% + 10 digits)
Load current	1 mA @ Last 125 kΩ
Short circuit current	<= 1 mA
Terminal voltage	250V (0 - 10%)
Measuring range	0.125 - 4 MΩ 4.001 - 40 MΩ 40.01 - 400 MΩ 400.1 - 1000 MΩ
Resolution	0.001 MΩ 0.01 MΩ 0.1 MΩ 1 MΩ
Accuracy	±(2% + 10 digits) ±(2% + 10 digits) ±(3% + 2 digits) ±(3% + 2 digits)
Load current	1 mA @ Last 250 kΩ
Short circuit current	<= 1 mA
Terminal voltage	500V (0 - 10%)
Measuring range	0.125 - 4 MΩ 4.001 - 40 MΩ 40.01 - 400 MΩ 400.1 - 1000 MΩ
Resolution	0.001 MΩ 0.01 MΩ 0.1 MΩ 1 MΩ
Accuracy	±(2% + 10 digits) ±(2% + 10 digits) ±(3% + 2 digits) ±(4% + 5 digits)
Load current	1-mA @ Last 500 kΩ
Short circuit current	<= 1-mA
Terminal voltage	1000V (0 - 10%)
Measuring range	0.125 - 4 MΩ 4.001 - 40 MΩ 40.01 - 400 MΩ 400.1 - 1000 MΩ
Resolution	0.001 MΩ 0.01 MΩ 0.1 MΩ 1 MΩ
Accuracy	±(3% + 10 digits) ±(2% + 10 digits) ±(3% + 2 digits) ±(4% + 5 digits)
Load current	1-mA @ Last 1 MΩ
Short circuit current	<= 1-mA
Low Ohm
Measuring range	2.000 Ω 20.00 Ω 200.0 Ω 2000 Ω
Resolution	0.001 Ω 0.01 Ω 0.1 Ω 1 Ω
Accuracy	±(1,5% + 30 digits) ±(1,5% + 3 digits) ±(1,5% + 3 digits) ±(1,5% + 5 digits)
Max. open circuit voltage	5.8 V 5.8 V 5.8 V 5.8 V
Overload protection	250 Vrms 250 Vrms 250 Vrms 250 Vrms
Continuity tester
Measuring range	2000 Ω
Resolution	0.01 Ω
Max. open circuit voltage	5.8 V
Overload protection	250 Vrms
Short circuit current	>= 200-mA
Grinding resistance
L-PE (Hi-Amp)	Load current 4.0 A
Measuring range	0.23 - 9.99 Ω 10.0 - 99.9 Ω 100 - 999 Ω
Resolution	0.01 Ω 0.1 Ω 1 Ω
Accuracy	±(4% + 4 digits) ±(4% + 4 digits) ±(4% + 4 digits)
L-PE (without tripping)	Load current 15-mA
Measuring range	0.23 - 9.99 Ω 10.0 - 99.9 Ω 100 - 999 Ω
Resolution	0.01 Ω 0.1 Ω 1 Ω
Accuracy	±(5% + 6 digits) ±(5% + 6 digits) ±(5% + 6 digits)
L-N	Load current 4.0 A
Measuring range	0.23 - 9.99 Ω 10.0 - 99.9 Ω 100 - 999 Ω
Resolution	0.01 Ω 0.1 Ω 1 Ω
Accuracy	±(4% + 4 digits) ±(4% + 4 digits) ±(4% + 4 digits)
RCD Tese
RCD (In)	10-mA, 30-mA, 100-mA, 300-mA, 650-mA, 1 A
Factors	x 1/2, x1, x2, x5
Accuracy of the tripping time	±(1% + 1 ms)
Signal form of the test current	Sine (AC)
Tripping characteristics	G and S
Release time	0º or 180º
Voltage range	194 - 260V AC (50/60 Hz)
Accuracy of current measurement	± (5% + 2 digits)
RCD Types	Type A, Type B
Voltage measurement
Measuring range	80 - 500V AC/DC
Resolution	1 V
Accuracy	±(2% + 2 digits)
Frequency measurement
Measuring range	45 - 65 Hz
Resolution	1 Hz
Accuracy	±2 Hz
Grounding measurement
Measuring range	0.00 - 99.99 Ω 100.0 - 999.9 Ω 1000 - 2000 Ω
Resolution	0.01 Ω 0.1 Ω 1 Ω
Accuracy	±(2% + 30 digits) ±(2% + 6 digits) ±(2% + 6 digits)
General specifications
Power supply	8 x 1.2 - 1.5V AA batteries
Operating time	Ca. 15 h
Measurement category	CAT III 600 V
Protection class	IP 65
Display	3,5 " TFT (320 x 240 Pixel)
Operating environment	0 - 45 ºC / 0 - 95% rH. non condensing
Measurements	24.2 x 10.5 x 14.5 cm
Weight	1.56 kg / 3.4 lbs

 

The PCE-ITE 50 installation tester is an indispensable tool for electricians and technicians working in the installation and maintenance of electrical systems. It stands out for its robustness and the ability to provide reliable measurements of various electrical parameters, ensuring the safety and proper functioning of fixed installations. Designed to offer a wide range of measurements, including insulation resistance, earth resistance, circuit impedance, and low resistance, the PCE-ITE 50 guarantees precise and immediate results thanks to its large 3.5-inch TFT color LCD display. The dual screen allows multiple values to be viewed simultaneously, improving the speed of measurement execution.

 

The PCE-ITE 50 is extremely versatile: in addition to measuring voltages up to 1000V, the tester offers the ability to perform RCD tests, essential for checking the correct operation of residual current devices (RCD), ensuring protection against potential fault currents. Thanks to the adjustable test current function, operators can perform precise checks, adapting to the specific requirements of each system.

 

This installation tester is particularly useful for monitoring and maintaining the electrical safety of industrial, civil, and commercial installations, helping to identify any anomalies or faults that could compromise operational safety. The measurement of insulation resistance is one of its most critical functions: during this process, the electrical cables are subjected to a test voltage ranging from 125V to 1000V, allowing leakage currents to be detected. If left unchecked, these currents can cause the insulating material to overheat, leading to damage or, in the worst-case scenario, fires.

 

The PCE-ITE 50 installation tester is independent of the electrical network, making it suitable for use in environments where power may not be available. Its portability is another key feature: thanks to its compact design and sturdy construction, it can be easily transported and used in difficult or confined spaces, while maintaining a high level of reliability. The rugged construction is ideal for withstanding the daily stresses encountered during field operations, ensuring long-lasting durability.

 

One of the main advantages of the PCE-ITE 50 is the ability to easily document measurement results thanks to its connectivity options, such as the SD card and Bluetooth. These features allow data to be saved and transferred quickly and securely, facilitating the creation of detailed reports and minimizing the risk of manual transcription errors. The documentation function is particularly useful for technicians working on complex projects, where monitoring and analyzing the collected data is essential for compliance with safety regulations.

 

The PCE-ITE 50 tester also excels in the measurement of earth resistance, a crucial parameter for ensuring that electrical systems are properly grounded. Low earth resistance is essential to prevent damage caused by overvoltage or short-circuit currents, and the measurement range from 0 to 2000 Ω, with a resolution of up to 0.01 Ω, provides extremely precise results necessary for ensuring the safe operation of installations.

 

Finally, the PCE-ITE 50 is equipped with a function for measuring low impedance, allowing verification of the status of earth circuits, potential equalization bars, and protective conductors. The precision and reliability of these measurements allow for the identification and correction of potential issues before they can cause more serious damage to installations or the people using them.

 

In conclusion, the PCE-ITE 50 installation tester is a complete and reliable tool for all electrical professionals. Thanks to its versatility, robustness, and precision, it represents an ideal solution for those who need to perform tests and maintenance on electrical installations, ensuring compliance with safety standards and the efficient operation of installations. Its numerous features, combined with the ability to document results, make it indispensable for those working in complex technical environments, where every detail is crucial to ensure the safety and reliability of electrical systems.

 

- 3.5" color TFT LCD display
- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- SD card and Bluetooth
- Dual display
- Good / bad FI test
- Low Ohm measurement
- Up to 1000V terminal voltage

 

1 x Insulation Tester PCE-ITE 50
1 x User manual