OMCN 350/A is a manual hydraulic pump supplied with a rubber flexible hose and quick coupling, designed to power pushing cylinders, pulling cylinders and hydraulic body-repair equipment. Its stated maximum pressure is 700 bar; the 1,100 cm³ reservoir and 2.26 cm³ oil delivery per pump stroke support controlled work on straightening benches, commercial vehicles and metal structures.

Manual operation gives the technician useful load-control sensitivity: the part can be approached, alignment checked and force increased progressively. Before pressurising, connect the clean quick coupling correctly and route the hose so it cannot be crushed, sharply bent or exposed to welding and cutting areas.

The pump is suitable for body shops, mechanical workshops, rail maintenance, light metal fabrication and field assembly teams using a portable hydraulic system. Selection must be coordinated with the cylinder oil volume: longer-stroke cylinders require more pump strokes and sufficient useful oil capacity. Use only components rated for the circuit pressure and never work with unsupported loads or damaged pressurised lines.