The METALLKRAFT MTBS MBSM 1350-30 M motorized sheet metal shear is designed for sheet metal cutting in workshops, metal fabrication shops, maintenance departments, subcontracting and production environments where straight cuts must be carried out with precision, safety and good productivity. Its solid welded structure provides stability during the cutting cycle and supports reliable operation on sheets of different thickness and strength.

The machine has a working width of 1350 mm, suitable for cutting medium-size sheets and sheet metal sections. It can cut material with 400 N/mm² tensile strength up to 3 mm and material with 700 N/mm² tensile strength up to 1.5 mm. This makes it suitable for common steels and stronger materials within the specified limits, with a cutting angle of 2.2° designed to support good cutting quality and proper distribution of cutting force.

The top beam is slider-guided with adjustable flat guides, helping ensure precise movement and blade stability during cutting. The high-quality rotatable blades are also suitable for cutting stainless steel within the machine’s capacity. Rotatable blades allow multiple cutting edges to be used, increasing blade service life and reducing maintenance-related downtime.

The manual backgauge has an adjustment range up to 750 mm with millimetre adjustment. This allows the cutting dimension to be set accurately and repeated cuts at the same size to be carried out more quickly. It is particularly useful for repetitive work, batch preparation and whenever constant strip or panel widths are required.

LED cut line illumination and slotted holes in the top cover help the operator see the cutting edge and sheet position more clearly. Good visibility of the cutting line helps reduce positioning errors, check material alignment and improve control during shearing operations.

The machine is equipped with a solid 90° side stop with 1000 mm length, T-slot, tilt cam and scale. This support makes sheet positioning easier and allows more controlled cutting when angular or lateral references are required. The two strong sheet support arms, with T-slots and tilt cams, improve material support before cutting and help with sheet handling.

The heavy hold-down bar with gentle rubber inserts secures the sheet during the cutting cycle and helps prevent unwanted movement. Correct material clamping is essential to obtain clean cuts, reduce deformation and maintain consistent dimensions. The rubber inserts help hold the sheet gently, limiting unwanted marks on the surface.

Operation is controlled via a mobile foot pedal console with emergency stop. This configuration allows the operator to keep both hands free to position the material correctly and activate the cutting cycle conveniently. The rear area is protected by a light curtain, an important safety feature for the exit area that reduces the risk of unintended access during operation.

The machine is powered by a 3 kW motor, with 400 V supply voltage and 50 Hz mains frequency. Productivity reaches 40 cuts per minute, depending on material and working conditions. With approximate dimensions of 1920x1920x1110 mm and a weight of approximately 1150 kg, the machine offers a stable construction suitable for professional workshop use.

For best results, sheet thickness and tensile strength should always be checked, the backgauge should be set correctly, the material should be supported on the support arms and alignment should be verified before pressing the foot pedal. Proper use of the hold-down bar, side stops and backgauge helps achieve repeatable, accurate and safe cuts.

The METALLKRAFT MTBS MBSM 1350-30 M is therefore a motorized shear suitable for users who need a robust machine for straight sheet metal cutting. The combination of welded structure, 1350 mm working width, 750 mm backgauge, rotatable blades, LED illumination, sheet supports, foot pedal operation and light curtain protection makes it a professional solution for workshops and production departments requiring precision, safety and continuous operation.