The ASTURO nylon hose with bayonet fitting is a compressed air accessory designed to provide a practical connection between compressors, airbrushes, spray guns, small pneumatic tools and compatible devices used in airbrushing, light painting, touch-up work, technical decoration, maintenance and finishing operations. The image shows the main product characteristics: 15 m length and Ø 6x8 mm diameter, making it suitable for workstations where good freedom of movement is required between the air source and the tool in use.

The hose performs an essential function in any compressed air workstation: it transfers air from the compressor to the final tool while keeping the connection flexible, organized and functional. Its nylon construction makes it suitable for applications requiring lightness, easy handling and good resistance in everyday use. The Ø 6x8 mm diameter identifies a compact hose, suitable for light and medium-light applications, especially when used with airbrushes, mini compressors, finishing spray guns or pneumatic accessories that do not require high air flow rates.

The bayonet fitting allows quick and practical connection to compatible couplings, making hose installation and removal easier during workstation setup, tool changes or cleaning of the work area. This type of connection is particularly useful in workshops, laboratories and departments where operators need to switch quickly from one accessory to another, reducing downtime and simplifying pneumatic connection management. Before use, the compatibility between the bayonet fitting and the connection on the compressor or tool must always be checked.

The 15 m length allows the operator to work at a greater distance from the compressor, avoiding the need to move the machine or air source continuously. This is useful in body shops, laboratories, maintenance areas and workstations where the part to be processed may vary in size or must be approached from different angles. An adequate hose length allows the operator to move around the component more freely, reducing unwanted pulling on the airbrush or spray gun and improving application continuity.

In airbrushing and light painting applications, the hose contributes to the operating stability of the compressor-airbrush system. A correct connection without kinks helps maintain a more regular air supply, reducing the risk of sudden flow variations that may affect atomisation, spray continuity and finishing quality. Although the hose does not directly determine application precision, correct selection and installation contribute to work repeatability and controlled management of the pressure set on the regulator.

For correct use, tight bends, crushing, twisting and routing through areas where the hose could be damaged by sharp edges, heat, abrasion or foot traffic should be avoided. During workstation preparation, the hose should be laid out in an orderly way, allowing enough freedom of movement without creating dangerous obstructions. In production departments and workshops, it is important to check the integrity of the hose, the condition of the fittings and the absence of air leaks periodically, since even small losses may reduce system efficiency and affect the pressure available at the tool.

The product can be used in several professional environments: body shops for small touch-ups and finishing, airbrushing and decoration laboratories, mechanical workshops for light blowing or supply of pneumatic accessories, preventive and extraordinary maintenance departments, prototyping areas, quality control benches and automotive environments where small compressed air tools are used. Its compact Ø 6x8 mm section makes it particularly suitable for light configurations, avoiding excessive bulk at the workstation.

In precision applications such as touch-up work on painted components, colour tests, marking or localized finishing, it is important that the hose does not restrict the operator’s movement and does not transmit tension to the tool. A hose that is too rigid, too short or incorrectly positioned may affect hand stability, working height and the regularity of each pass. Thanks to its 15 m length and nylon construction, the ASTURO 3610015 hose offers a practical solution for creating a functional connection between the compressor and the application point.

The ASTURO 3610015 nylon hose with bayonet fitting is therefore a simple but important accessory for improving the organization of a pneumatic workstation and supporting operations where practicality, quick connection, freedom of movement and continuous air supply are essential. It is suitable for technicians, maintenance operators, automotive professionals, decorators, workshops and laboratories requiring a light and compact hose for compressed air connections in professional and technical applications.