Non-destructive testing meter designed for non-invasive material inspection, essential in industrial testing, metal component verification, and weld inspection. The operating principle is based on the transmission of ultrasonic waves through the test object using a contact probe. The waves, refracted and reflected at interfaces with differing acoustic impedance, generate echoes used to locate internal defects, measure thicknesses, and detect discontinuities.

Technical specifications:

With adjustable frequencies from 0.5 to 20 MHz and sound velocity settings ranging from 1,000 to 15,000 m/s, accurate measurements up to 10,000 mm in steel and structural materials can be achieved.

A-scan display, evaluation using DAC curves and AVG functions, fine tuning via rotary knob, and an intuitive interface ensure high precision in NDT applications. The built-in screen video recording and memory for up to 100 records allow for traceable, exportable, and archivable analyses via dedicated software and USB interface.

The ergonomic design and lightweight 1.1 kg construction make the device suitable for both portable and benchtop use, even in harsh industrial environments. The 5.7-inch TFT color display ensures a clear view of real-time test results, making the meter ideal for use in industrial, metallurgical, naval, aerospace, and construction sectors.

Features:

- Single or dual probe measurement
- AVG and DAC evaluation methods
- Sound velocity 1000 - 15000 m/s
- Low weight
- TFT colour display
- USB interface and software
- Memory for up to 100 data records

Delivery scope:

1 x defectoscope PCE-UFD 50
1 x vertical probe
1 x angle probe
2 x probe cable approx. 1 m
1 x power supply unit 12.6 V / 2 A
1 x power cable
1 x transport case
1 x operating instructions