PCE Instruments PCE-123 Multimeter with setpoint indicator for simulations and measurement of electrical signals, frequency and temperature
(Incl. Tax: €686.25)
The multimeter is an instrument that does not need a mains connection and is used to simulate control or unit signals in MSR technology, with which it can verify and calibrate almost all parameters of units and measuring instruments. The nominal value indicator is used to establish an electrical output signal. This multimeter also has automatic levelling or graduation functions, a percentage selection of output signal overhangs and direct indication of the output value.
The multimeter is operated intuitively and directly via the keypad. This multimeter is characterised by its high precision and universal scope of use, so that it cannot be missing from any electronics laboratory or MSR department, as well as in industry. With this multimeter we offer you an affordable, high-quality alternative to the expensive instruments you can normally find on the market.
| Technical specifications | |
| mA DC current (maximum load at 1kΩ, powered by 24V) | |
| Range | 4 to 20mA / 0 to 20mA / 0 to 24mA |
| Resolution | 1µA |
| Accuracy | ±0.025% ±3µA |
| Alert | beeps when there is a short circuit or ouput current >1mA . |
| mV current, V DC (power 1mA) | |
| Ranges | 0 to 100.00 mV 0 to 10.000 V 0 to 1.0000 V |
| Resolution | 10 µV 1 mV 1.0000 V |
| Accuracy | ± 0.05% ±30 µV ± 0.05% ±3 mV ± 0.05% ±300 µV |
| Alert | beeps when there is a short circuit or ouput current >10mV. |
| Temperature sensor thermocouple type-K, J, E, T (1 kΩ min.) | |
| Ranges | K: -200 ... 0 °C / -328 ... 32 °F and 0 ... 1370 °C / 32 ... 2498 °F J: -100 ... 0 °C / -148 ... 32 °F and 0 ... 760 °C / 32 ... 1400 °F E: -10 ... 0 °C / 14 ... 32 °F and 0 ... 700°C / 32 ... 1292 °F T: -200 ... 0°C / -328 ... 32 °F and T: 0 ... 400 °C / 32 ... 752 °F |
| Resolution | 1°C (across entire range) |
| Accuracy | K: ±1.1°C and ±0.8°C J: ±0.9°C and ±0.7°C E: ±0.9°C and ±0.7°C T: ±1.0°C and ±0.8°C |
| Frequency | |
| Range | 1 to 125Hz and 126 to 62.5kHz |
| Resolution | 1 to 125Hz / 1Hz 126 to 62.5kHz / 604 readings |
| Accuracy | ±0.04Hz |
| Selection | 604 frequencies |
| General characteristics | |
| Display | 5 position LCD |
| Operating conditions | 0 ... 50 °C / 32 ... 122 °F <85% r.h. |
| Storage conditions | -20 ... 60 °C / -4 ... 140 °F; <85% r.h. |
| Power | 1 9V battery or 6 x 1.5V batteries |
| Consumption | 60mA to 180mA (depending on output) |
| Battery indicator | 5.5V for 150mA |
| Dimensions | 88 x 168 x 26mm / 3.4 x 6.6 x 1 in |
| Weight | 330 g / 11.6 oz |
- 0 to 100.00 mV / 0 to 1,0000V / 0 to 12,000V
- type-K, J, E, T temperature thermocouple sensors (°C or °F)
- Frequency range 1 to 62,500Hz
- Accuracy of 0.025%
- Operated via keypad
- Graduated automatic functions
- Selectable between 0 to 20mA/ 0 to 24mA
- Input 0 to 100% (mA, mV, V )
- Alarm beep 'open' (mA) or 'short circuit' (mV, V)
1 x PCE-123 Process calibrator
1 x Carrying case
1 x Type-k adaptor
6 x Batteries
1 x Test cables with alligator clips
1 x User's manual
- EAN Code:
- 4250348700209
- Typology:
- Multifunctional
- Brand:
- PCE INSTRUMENTS
