GO and NO GO Threaded plug gauges - Smooth plug gauges - Threaded rings - Smooth rings - Setting rings - Precision balls - Snap gauges - Pin

Ring gauges - Limit gauges - Balls - Pins High quality hardened steel plug gauges, available threaded or smooth with fine or coarse pitch for fast inspection of holes in tolerance for ISO Metric M, ISO Metric fine MF, American Whitworth, BSPP and gas threads, BSPT, BSW, Trapezoidal threads TPN, NPT e NPTF, UNC and UNF. Calibration rings for calibrating internal micrometers, master rings for calibrating all instruments, threaded pass/fail rings for checking external threads and professional calibrated ball pairs for precision measurement used in the precision industry and for manufacturing ball bearings. Clamping rings for shafts and internal measuring instruments made of high quality hardened steel. In this section you will find setting rings, through-hole threaded rings, non through-hole threaded rings, rings for taper threads, double fork gauges, cone gauges, cone gauges, precision balls, professional calibrated balls, threaded plug gauges, threaded plug gauges through, t…

Ring gauges - Limit gauges - Balls - Pins

High quality hardened steel plug gauges, available threaded or smooth with fine or coarse pitch for fast inspection of holes in tolerance for ISO Metric M, ISO Metric fine MF, American Whitworth, BSPP and gas threads, BSPT, BSW, Trapezoidal threads TPN, NPT e NPTF, UNC and UNF.

Calibration rings for calibrating internal micrometers, master rings for calibrating all instruments, threaded pass/fail rings for checking external threads and professional calibrated ball pairs for precision measurement used in the precision industry and for manufacturing ball bearings.

Clamping rings for shafts and internal measuring instruments made of high quality hardened steel.

In this section you will find setting rings, through-hole threaded rings, non through-hole threaded rings, rings for taper threads, double fork gauges, cone gauges, cone gauges, precision balls, professional calibrated balls, threaded plug gauges, threaded plug gauges through, threaded plug gauges through/through, smooth plug gauges through/through.

Accredia certification available on request.

Tadaah Commerce

Gauges - Balls - Setting ring - Pin

3901.05 Tapper plug Gauge witout tenon for MT4 - DIN 230

3901.06 Tapper plug Gauge witout tenon for MT5 - DIN 230

3901.07 Tapper plug Gauge witout tenon for MT6 - DIN 230

3954 Schmalkalden GO/NO GO limit plug gauge for BSPT threads - from 1/16" to 6" - DIN 2999 - EN 10226-1

3952.01 GO/NO GO limit plug gauge for NPT threads - Ø1/16"-27 - ANSI/ASME B 1.20.1

575.000 Series of limit plug gauges, tollerance H7 “go” and “no go”, DIN 2245 from Diam.2mm to Diam.100mm

571.000 Series of thread ring gauges “Go” for cylindrical GAS Thread ISO 228G - From G 1/8"-28 to G 2 1/2"‐11

590.5 Thread ring gauges "GO" for American thread UNC 2A - From 4‐40UNC 2A to 1‐8UNC 2A

590.5N Thread ring gauges "NO GO" American UNC 2A thread - From 4‐40UNC 2A to 1‐8UNC 2A

590.1PNP Threaded plug gauges "GO/NO GO" - American thread UNC 2B - From 4-40UNC 2B to 7/8-9UNC 2B

590.3PN Threaded "GO/NO GO" plug gauges - American thread UNF 2B

VG590.7N Thread ring gauges "NO GO", American UNF 2A thread

590.7 Thread ring gauge "GO" for American UNF 2A threading - From 4-48UNF-2A to 1-12UNF-2A thread

571.521N Limit thread gauges "NO GO" Cylindrical Gas Thread ISO 228G - GAS 7/8"-14

571.603 Thread ring gauge for GAS thread Conical ISO 7R - GAS R 1/8"-28

571.606 Thread ring gauge for GAS thread Conical ISO 7R - GAS R 1/4"-19

571.612 Thread ring gauge for GAS thread Conical ISO 7R - GAS R 1/2"-14

571.630 Thread ring gauge for GAS thread Conical ISO 7R - GAS R 1"-11

C572.000 Limit thread gauges “go” and “no go” with ISO DIN 13 rough thread - Tollerance 6H

571.700 Threaded rings for GAS thread Conical B.1.20.1 American from NPT 1/8"-27 to NPT 1"-11.5

574.200 Threaded pin gauges for tapered GAS thread B.1.20.1 American NPT of your choice

569.000 Case Set with 7 threaded rings gauges "GO" M3-M12 rough thread DIN 13, precision tolerance 6g

569.000N Case Set with 7 threaded rings gauges "No GO" M3-M12 rough thread DIN 13, precision tolerance 6g

571.000N Series of thread ring gauges “NO Go” for cylindrical GAS Thread ISO 228G - From G 1/8"-28 to G 2 1/2"‐11

38000 Double SMOOTH differential Limit plug gauge GO/NO GO - Tolerance H7 - DIN7162

VOGEL 006.695 Set of calibrated pins made of hardened steel, tolerance 0.004 mm, length 50 mm, sizes from 1 to 20 mm

VOGEL 006.8020 Hardened steel gauge pin, tolerance ±0.002 mm, length 50 mm, available in diameters from 0.20 to 10.0 mm

VOGEL 006.696 Set of calibrated pins made of hardened steel, tolerance 0.004 mm, length 50 mm, sizes from 0.5 to 20 mm

VOGEL 006.700 Set of calibrated pins made of hardened steel, tolerance 0.002 mm, length 50 mm, sizes from 0.1 to 10 mm

VOGEL 006.761 Set of calibrated pins made of hardened steel, tolerance 0.002 mm, length 50 mm, sizes from 10.0 to 16 mm

VOGEL 006.762 Set of calibrated pins made of hardened steel, tolerance 0.002 mm, length 50 mm, sizes from 16.0 to 20 mm

VOGEL 006.9001 Hardened steel gauge pin, tolerance ±0.002 mm, length 50 mm, available in diameters from 10.01 to 17.99 mm

VOGEL 006.9800 Hardened steel gauge pin, tolerance ±0.002 mm, length 50 mm, available in diameters from 18.0 to 20.0 mm

VOGEL 006.A001 Hardened steel gauge pin, tolerance ±0.002 mm, length 50 mm, available in diameters from 20.01 to 25.0 mm

Need our support?

How to find us

Information