The PG-I 55 SE-S HC portable inverter generator is a professional power supply solution designed to provide stable, transportable electrical energy for technical, domestic and emergency applications. Its inverter technology delivers pure sine wave power, an essential feature when powering devices with sensitive electronic components, measuring instruments, battery chargers, PCs, control units, control equipment, professional lighting and loads that require a more stable voltage than conventional generators usually provide.

The PG-I 55 SE-S HC model runs on petrol and provides 5 kW rated power, with a maximum output of 5.5 kW. This power capacity makes it suitable for construction sites, mobile workshops, maintenance operations, temporary installations, markets, fairs, agricultural businesses, craft work and domestic backup applications when mains power is not available or temporarily insufficient. The 11 l fuel tank allows an operating time of up to 8 h at 50% load and approximately 4 h at 100% load, enabling continuous use in many working conditions.

The enclosed soundproofed structure helps reduce noise during operation, with an LP noise level of 77 dB(A). Operation is further optimised by the ECO mode, which continuously adjusts engine speed according to the power required by the connected load. When energy demand is lower, the generator operates at a reduced engine speed, helping to lower fuel consumption, engine wear and noise impact. This function is particularly useful for variable loads, lighting, intermittently used tools and electronic equipment.

The operating panel is designed for immediate control and practical use. The generator includes indicator lights for output voltage, overload and low oil level, as well as a choke for easy cold starting. Available outputs include one 230 V 16A socket, one 230 V 32A socket and one 12 V DC 8.3A socket, allowing different types of loads to be connected according to their power requirements. The output sockets have IP44 protection, while the generator has IP23M protection.

Manual and electric start make the PG-I 55 SE-S HC practical for operators who use the generator frequently or in situations where power must be restored quickly. The AVR voltage regulator contributes to stable voltage output, while suitability for domestic power supply with a manual mains isolator switch allows integration into properly prepared systems installed by qualified personnel. This feature is useful when the generator is used as temporary support in the event of a mains power failure.

For safe and correct operation, connected loads should always be calculated according to the generator’s rated power, also considering the starting current of electric motors, pumps, compressors or tools with high initial absorption. Before use, it is advisable to check the oil level, verify the fuel, ensure proper ventilation, avoid operation in closed or poorly ventilated areas and follow safety instructions for connecting loads. With dimensions of 590x405x545 mm, a weight of 39.5 kg, trolley and upper handle, the generator is compact, transportable and suitable for use in multiple working locations.