The PG-I 45 SE-S HC portable inverter generator is a professional power supply solution designed to provide stable and easily transportable electrical energy for domestic, craft, light industrial, construction, mobile workshop, market, fair, maintenance and emergency applications. Its inverter technology delivers pure sine wave current, making it suitable for powering devices with sensitive electronic components such as control units, battery chargers, measuring instruments, control systems, computers and equipment requiring a more stable voltage than conventional generators can normally provide.

The PG-I 45 SE-S HC model runs on petrol and provides 4 kW rated power, with a maximum output of 4.4 kW. This makes it suitable for electric tools, temporary lighting, small systems, pumps, work equipment and auxiliary power needs where the mains supply is unavailable or insufficient. The 12 l fuel tank and operating time of up to 7.5 h at 50% load allow continuous use in many working conditions, while operating time at full load is approximately 4.5 h.

The soundproofed structure helps reduce noise during operation, with an LP noise level of 77 dB(A). The ECO mode automatically adjusts engine speed according to the required energy consumption, helping to reduce fuel consumption when the applied load is lower than the available maximum power. This function is particularly useful when the generator is used with variable loads, electronic instruments, lighting or equipment that does not require full power continuously.

The control panel is designed for practical and immediate operation. It includes a digital display for voltage, frequency and running time, indicator lights for low oil level, overload and operating status, two AC 230 V 16A sockets, one DC 12 V 8.3A socket, ATS connection, ECO switch, overload protection and grounding point. The ATS connection allows integration with automatic transfer systems, which is useful for domestic power supply or electrical continuity applications when the generator must support the system in case of mains failure.

Manual and electric start make the generator easy to start even in frequent-use conditions. The starter supports cold starting, while the warning lights allow the operator to quickly monitor the main operating conditions. The output sockets have IP44 protection, while the generator has IP23M protection, making it suitable for technical environments, construction sites and controlled outdoor applications, always in compliance with the correct safety conditions.

For correct use, the connected load should always be calculated according to the generator’s rated power and not only according to its maximum output. Loads with electric motors, compressors, pumps or tools with high starting current may require more power during start-up than during normal operation. It is important to check the oil level, use suitable fuel, ensure proper ventilation, connect grounding when required and never operate the generator in closed or poorly ventilated areas. With a weight of 40 kg, compact dimensions of 595x440x515 mm, trolley and upper handle, this model is practical to move and suitable for work in different locations.