The ASTURO pre-atomized reversible tip for electric piston airless pumps is a technical component designed for professional spraying of paints, enamels, primers, spray fillers, water-based paints and technical coatings. It is mounted on the airless spray gun and converts the coating material into a controlled spray fan suitable for the surface and the required finish. The pre-atomized design helps improve material distribution as it exits the tip, supporting more even coverage, better surface quality and more stable application.

The reversible construction is a practical advantage in professional work. In the event of a temporary blockage, the operator can rotate the tip to clear the material passage without fully disassembling the spraying assembly. This feature is particularly useful when working with dense products, filled materials, primers, spray fillers or technical coatings that may generate residues or small particles during application. Once cleared, the tip can be returned to the working position and spraying can continue with fewer interruptions.

The correct tip should be selected according to the material being applied, its viscosity, the electric piston airless pump used, the required spray fan width, the output needed and the filter fitted to the gun. For transparent paints, pigmented paints and enamels, finer-flow tips are generally preferred because they provide greater control and a more delicate finish. For nitro, synthetic and polyurethane paints, an intermediate configuration is suitable to maintain a good balance between coverage, uniformity and precision. For spray fillers, primers, zinc-rich coatings and heavier products, a tip with greater output capacity is required to ensure continuous and regular application.

In construction and industrial applications, this type of tip can also be used for water-based paints, washable paints, coatings for prefabricated elements, waterproofing products, quartz paints, epoxy coatings, fireproof and flame-retardant paints, as well as products requiring high film thickness. In these cases, selection must take into account pump capacity, material flow resistance, the surface to be covered and the productivity required. A properly selected tip helps reduce uneven overlaps, runs, localized build-up and unnecessary material waste.

This accessory is used for professional coating of metal fabrication, industrial structures, frames, panels, prefabricated elements, building surfaces, walls, wooden components, machinery, plants and maintenance work. It is suitable for operators using electric piston airless pumps who need fast, continuous and controlled application, both in workshops and on job sites. Spray fan quality and the correct combination of tip, material, pump and filter are essential for achieving a uniform and repeatable finish.

To maintain consistent performance, the coating material should be properly filtered before use, the paint manufacturer’s instructions should be followed, the correct gun filter should be selected and the gun, tip holder and tip should be thoroughly cleaned after each work cycle. A worn tip or a tip unsuitable for the material can alter the spray pattern, increase material consumption and reduce finish quality. The ASTURO pre-atomized reversible tip is therefore a professional solution for users looking for reliability, easy handling and high-quality spraying in applications with electric piston airless pumps.