PCE Instruments PCE-CT 80-FN0D5 Paint thickness gauge on ferrous and nonferrous metals, nondestructive accurate measurement, external sensor, USB, built-in memory, ergonomic design
(Incl. Tax: €818.79)
The coating thickness gauge is a professional tool for non-destructive measurements on ferrous (Fe) and non-ferrous (NFe) surfaces. With an external sensor, it reaches difficult areas, while the USB interface and built-in memory simplify data transfer. Ideal for quality control, workshops, and the automotive sector, it detects damage from accidents and verifies thicknesses of paints, plastics, copper, and other non-magnetic coatings on steel, aluminum, and alloys. The V-shaped probe ensures stability, while the audible alarm alerts to range exceedances.
The coating thickness gauge is an essential tool for non-destructive measurement of paints and protective layers on both ferrous and non-ferrous metals. Advanced technology ensures precise readings on steel, aluminum, copper, and other alloys, with reliable accuracy even in challenging operating conditions.
Technical specifications:
| Measuring range | Fe: 0 - 500 µm NFe: 0 - 500 µm |
| Accuracy | ±(1 % of reading + 1 µm) 0.1 µm (<100 µm) |
| 1 µm (>100 µm) | |
| Measurable materials | For measurements on iron/steel and non-ferrous metals |
| Min. radius of curvature convex | 5 mm / 0.19" |
| Min. radius of curvature concave | 25 mm / 0.98" |
| Min. measuring surface | Ø17 mm / 0.67" |
| Min. substrate thickness | 0.2 mm / 0.008" (on magnetic materials) 0.05 mm / 0.002" (on non-magnetic materials) |
| Probe mode | Autom. mode with material detection (Fe + NFe) Magnetic mode (Fe) Eddy current mode (NFe) |
| Calibration | Multipoint calibration (1 - 4 points for each group) Zero-point calibration |
| Units | µm, mm, mils |
| Data transfer | USB 2.0 |
| Memory | A volatile measuring group (DIR mode) |
| Four measuring groups with autom. storage and max. 2000 readings (GEN mode) | |
| Statistical functions | Number of measured values, mean, minimum, maximum, standard deviation |
| Alarm | Display when the adjustable upper and lower alarm limits are exceeded |
| Operating time | Autom. shutdown mode (3 min.) |
| Power supply | 3 x 1.5 V AAA batteries |
| Display | 128 x 128 px LCD display |
| Indicators | Battery status Fault detection |
| Operating conditions | 0 - +50 °C / 32 - 122 °F 20 - 90 % RH non-condensing |
| Storage conditions | -10 - +60 °C / 14 - 140 °F 20 - 90 % RH non-condensing |
| Dimensions | 143 x 71 x 37 mm / 5.6 x 2.8 x 1.5" (L x W x H) |
| Weight | With sensor and batteries: ca. 271 g / 9.5 oz |
Operation is intuitive thanks to the ergonomic design and V-shaped probe that provides stability during measurements. The external sensor, wear-resistant and spring-loaded, accesses hard-to-reach areas while maintaining result reliability. The audible alarm automatically signals when exceeding the maximum measurement range.
Primary applications include the automotive sector for accident damage analysis, industrial quality control in production processes, and compliance verification of incoming/outgoing materials. Versatile functionality extends to measuring paints, plastics, chrome platings, and enamels on various metal substrates.
Technical features include battery power, integrated memory, and USB interface for data transfer. Optional sensors further expand application possibilities, making this instrument suitable for diverse professional requirements.
Features:
- For measurements on iron/steel and non-ferrous metals
- Measurements cannot be influenced by vibrations
- Practical V-groove on the measuring heads
- Ergonomic design
- Warning message for measurements outside the maximum measuring range
- Wear-resistant, spring-mounted measuring head for precise measuring results
Delivery scope:
1 x Car measuring device PCE-CT 80-FN0D5
3 x AAA batteries
1 x Instruction manual
1 x Carrying case
1 x Set of standard foils
1 x Calibration plates (Fe and NFe)
- EAN Code:
- 4250348732040
- Typology:
- Thickness gauges
- Brand:
- PCE INSTRUMENTS
