OMCN 350/C is a pushing ram for hydraulic body-repair equipment, with a rated capacity of 12 t, dimension A= 400 mm and dimension B= 630 mm. It is intended for controlled pushing, straightening and geometry recovery when a component must be moved progressively toward its correct position.

The cylinder is connected to a compatible hydraulic pump through the system circuit. Before loading, provide a strong reaction point, verify that the cylinder axis is aligned with the force direction and choose a contact head that will not concentrate load on unsuitable areas.

In body repair it is useful for chassis rails, crossmembers, frames and structural panels; in workshops and metal fabrication it can assist positioning and alignment operations. Do not use the cylinder as a prop or general lifting device. Pump, couplings and accessories must be selected separately for the working configuration.