OMCN 106/B1 Pair of Ø7 mm chains in high resistance alloy steel, tempered, tested and chromated of mt. 1.5 each one, complete with hook
In stock
SKU
OM-106/B1
€87.00
(Incl. Tax: €106.14)
(Incl. Tax: €106.14)
OMCN 106/B1 pair of high-strength alloy-steel chains, wire Ø= 7 mm and L= 1.5 m per chain, complete with hooks. They are optional accessories for pulling systems and geometry recovery in body repair, to be used only with compatible cylinders, attachments and anchoring points. Selection must consider the pulling line, chain angle and rating of the weakest component in the configuration. Always verify the suitability of the complete hydraulic setup before applying load.
OMCN 106/B1 consists of two high-strength alloy-steel chains with wire diameter Ø= 7 mm, each L= 1.5 m long and fitted with hooks.
The chains are intended for hydraulic pulling configurations and straightening work. They extend the use of the OMCN 106/B kit, for example, provided all connection parts and anchoring points are suitable.
Do not twist chains, route them over sharp edges or use knots and improvised extensions. Before every use, inspect hooks, links and retaining components for deformation, cracks, corrosion and complete engagement.
- Brand:
- OMCN
