Language
English

Hello Guest!
Login / Register
Your Cart 0
€0.00

TADAAH

View as Grid List

Items 49-96 of 211

Set Descending Direction
per page
Page
  1. 050008 D Standard ER8 collets, DIN 6499 / ISO 15488, diameter at your choice

    050008 D Standard ER8 collets, DIN 6499 / ISO 15488, diameter at your choice

    As low as €9.50
    (Incl. Tax: €11.59)
  2. 172.600FCM Revolving tailstocks with MT3, MT4, MT5 taper connections, without absorber stroke, for single and multi-spindle lathes

    172.600FCM Revolving tailstocks with MT3, MT4, MT5 taper connections, without absorber stroke, for single and multi-spindle lathes

    As low as €294.30
    (Incl. Tax: €359.05)
  3. 172.400FCM Revolving tailstocks with MT2, MT3 taper connections, without absorber stroke, for single and multi-spindle lathes

    172.400FCM Revolving tailstocks with MT2, MT3 taper connections, without absorber stroke, for single and multi-spindle lathes

    As low as €255.60
    (Incl. Tax: €311.83)
  4. 172.600CM Revolving tailstocks with MT3, MT4, MT5 taper connections, 2,5 mm absorber stroke, for single and multi-spindle lathes

    172.600CM Revolving tailstocks with MT3, MT4, MT5 taper connections, 2,5 mm absorber stroke, for single and multi-spindle lathes

    As low as €294.30
    (Incl. Tax: €359.05)
  5. 172.400CM Revolving tailstocks with MT2, MT3 taper connections, 3 mm absorber stroke, for single and multi-spindle lathes

    172.400CM Revolving tailstocks with MT2, MT3 taper connections, 3 mm absorber stroke, for single and multi-spindle lathes

    As low as €255.60
    (Incl. Tax: €311.83)
  6. 172.300-F-CM2 Revolving tailstock with MT2 Morse taper connection and without absorber stroke, for single and multi-spindle lathes

    172.300-F-CM2 Revolving tailstock with MT2 Morse taper connection and without absorber stroke, for single and multi-spindle lathes

    €223.00
    (Incl. Tax: €272.06)
  7. 172.300-CM2 Revolving tailstock with MT2 Morse taper connection and 2 mm absorber stroke, for single and multi-spindle lathes

    172.300-CM2 Revolving tailstock with MT2 Morse taper connection and 2 mm absorber stroke, for single and multi-spindle lathes

    €223.00
    (Incl. Tax: €272.06)
  8. 172.600F Contropunte rotanti con gambo cilindrico senza compressione per torni mono e plurimandrino - Fornite con cuspide Standard 60°

    172.600F Rotating live centres with cylindrical shank and without compression stroke for single and multi-spindle lathes with Standard interchangeable insert 60°

    As low as €280.80
    (Incl. Tax: €342.58)
  9. 172.600 Contropunte rotanti con attacco cilindrico e corsa di compressione 2,5mm per torni mono e plurimandrino - Fornite con cuspide Standard 60°

    172.600 Rotating live centres with compression stroke 2,5mm and cylindrical shank for single and multi-spindle lathes with Standard interchangeable insert 60°

    As low as €312.00
    (Incl. Tax: €380.64)
  10. 164.CGM Collet chucks ER11, ER16, ER20, ER25 DIN 6499 with various collet shanks, with mini ring nut

    164.CGM Collet chucks ER11, ER16, ER20, ER25 DIN 6499 with various morse taper shanks, with mini ring nut

    As low as €64.00
    (Incl. Tax: €78.08)
  11. 163.CGS Collet chucks ER11, ER16, ER20, ER25, ER32, ER40 DIN 6499 with various collet shanks, with standard ring nut

    163.CGS Collet chucks ER11, ER16, ER20, ER25, ER32, ER40 DIN 6499 with various morse taper shanks, with standard ring nut

    As low as €64.00
    (Incl. Tax: €78.08)
  12. 40.SG Solid carbide end mills for common steels up to 55 HRC and alloys, with frontal head cut, 4 flutes with round chipbreaker, TiAlN Bronze coated, cutter diameter from 6 to 25mm

    40.SG Solid carbide end mills for common steels up to 55 HRC and alloys, with frontal head cut, 4 flutes with round chipbreaker, TiAlN Bronze coated, cutter diameter from 6 to 25mm

    As low as €25.00
    (Incl. Tax: €30.50)
  13. 30.RM Solid carbide (HM) end mills for copper, aluminium and medium/low-strength steels, edge-break chamfer, 3 flutes, RAYNBOW coated, cutter diameters from 2 to 20mm

    30.RM Solid carbide (HM) end mills for copper, aluminium and medium/low-strength steels, edge-break chamfer, 3 flutes, RAYNBOW coated, cutter diameters from 2 to 20mm

    As low as €16.00
    (Incl. Tax: €19.52)
  14. 500F.5xD Solid carbide twist drills, CRALINIT-coated, drilling depth 5xD, drill angle 140°, with lubrication holes, drill diameter from 3 to 20mm

    500F.5xD Solid carbide twist drills, CRALINIT-coated, drilling depth 5xD, drill angle 140°, with lubrication holes, drill diameter from 3 to 20mm

    As low as €45.00
    (Incl. Tax: €54.90)
  15. 300.3xD Solid carbide twist drills CRALINIT 3xD, point angle 140°, no coolant holes, tip diameter from 2 to 20mm

    300.3xD Solid carbide twist drills CRALINIT 3xD, point angle 140°, no coolant holes, tip diameter from 2 to 20mm

    As low as €25.00
    (Incl. Tax: €30.50)
  16. 300F.3xD Solid carbide twist drills, CRALINIT-coated, drilling depth 3xD, drill angle 140°, with lubrication holes, drill diameter from 3 to 20mm

    300F.3xD Solid carbide twist drills, CRALINIT-coated, drilling depth 3xD, drill angle 140°, with lubrication holes, drill diameter from 3 to 20mm

    As low as €38.00
    (Incl. Tax: €46.36)
  17. 500.5xD Solid carbide twist drill bits coated with CRALINIT 5xD tip angle 140°, without lubrication holes, tip diameters from 2 to 20mm

    500.5xD Solid carbide twist drill bits coated with CRALINIT 5xD tip angle 140°, without lubrication holes, tip diameters from 2 to 20mm

    As low as €29.00
    (Incl. Tax: €35.38)
  18. 35.00 High-strength steel cutters with 3 cuts and corner breakers in solid carbide, coated in TiAlN Plus, Weldon shank, 45° helix, choice of cutting diameter

    35.00 High-strength steel cutters with 3 cuts and corner breakers in solid carbide, coated in TiAlN Plus, Weldon shank, 45° helix, choice of cutting diameter

    As low as €25.00
    (Incl. Tax: €30.50)
  19. 80.FTC Milling cutters for hardened steels 58/60 HRC made of solid carbide HM, face cutting, TiSiN coated, lengths and cutting diameters at choice

    80.FTC Milling cutters for hardened steels 58/60 HRC made of solid carbide HM, face cutting, TiSiN coated, lengths and cutting diameters at choice

    As low as €38.00
    (Incl. Tax: €46.36)
  20. 195.000 Duoble seated floating tap holders with extension, ER11 and ER16 collet, cylindrical shank diameter and shank lenght of your choise

    195.000 Duoble seated floating tap holders with extension, ER11 and ER16 collet, cylindrical shank diameter and shank lenght of your choise

    As low as €175.00
    (Incl. Tax: €213.50)
  21. 194.000 Floating tap holders with extension, ER11, ER16, ER20, ER25 collet, cylindrical shank diameter and shank lenght of your choise

    194.000 Floating tap holders with extension, ER11, ER16, ER20, ER25 collet, cylindrical shank diameter and shank lenght of your choise

    As low as €100.80
    (Incl. Tax: €122.98)
  22. 210.000 Corpo per porta filiere con gambo cilindrico e attacco filettato per filiere, filetto e gambo a scelta

    210.000 Body for die holder with cylindrical shank and thread connection for dies, thread and shank of your choice

    As low as €138.55
    (Incl. Tax: €169.03)
  23. 382.500 Die holder for drill-thread device with thread 26x1.5 lh for SAIC B26-30, ITS 26, GIORGI 20-25-30 - Dies housing size at your choice

    382.500 Die holder for drill-thread device with thread 26x1.5 lh for SAIC B26-30, ITS 26, GIORGI 20-25-30 - Dies housing size at your choice

    As low as €54.15
    (Incl. Tax: €66.06)
  24. 382.200 Die holder for drill-thread device with thread 25x1.5 lh for TRAUB A 15-20-25 - Dies housing size at your choice

    382.200 Die holder for drill-thread device with thread 25x1.5 lh for TRAUB A 15-20-25 - Dies housing size at your choice

    As low as €54.15
    (Incl. Tax: €66.06)
  25. 380.600 Die holder with nut for sliding head-stock sutomatic lathes with cilindrical shank - Dies housing size at your choise

    380.600 Die holder with nut for sliding head-stock sutomatic lathes with cilindrical shank - Dies housing size at your choise

    As low as €103.00
    (Incl. Tax: €125.66)
  26. 380.100B Die holder without nut for sliding head-stock automatic lathes with cilindrical shank - Dies housing size at your choice

    380.100B Die holder without nut for sliding head-stock automatic lathes with cilindrical shank - Dies housing size at your choice

    As low as €72.00
    (Incl. Tax: €87.84)
  27. 380.100 Die holder without nut for sliding head-stock automatic lathes with cilindrical shank - Dies housing size at your choice

    380.100 Die holder without nut for sliding head-stock automatic lathes with cilindrical shank - Dies housing size at your choice

    As low as €72.00
    (Incl. Tax: €87.84)
  28. 380.500 Porta filiere per torni plurimandrino con gambo cilindrico - Sede Filiera a scelta (Misura)

    380.500 Die holder for multispindle lathes with cilindrical shank - Dies housing size at your Choice

    As low as €115.60
    (Incl. Tax: €141.03)
  29. 380.545B Die holder for multispindle lathes with cilindrical shank 20mm - Suitable for dies diameter 45mm and height 18mm

    380.545B Die holder for multispindle lathes with cilindrical shank 20mm - Suitable for dies diameter 45mm and height 18mm

    Special Price €115.60 Regular Price €136.00
    (Incl. Tax: €141.03)
  30. 380.538B Die holder for multispindle lathes with cilindrical shank 20mm - Suitable for dies diameter 38mm and height 14mm

    380.538B Die holder for multispindle lathes with cilindrical shank 20mm - Suitable for dies diameter 38mm and height 14mm

    Special Price €115.60 Regular Price €136.00
    (Incl. Tax: €141.03)
  31. 384.100 Die holder with cilindrical shank for tapping and drilling machines - Dies housing size at your Choice

    384.100 Die holder with cilindrical shank for tapping and drilling machines - Dies housing size at your Choice

    As low as €168.30
    (Incl. Tax: €205.33)
  32. 384.145B Portafiliera gambo cilindrico 15mm per maschiatrici, torni e trapani - Adatto per filiere Dia. 45mm, altezza 18mm

    384.145B Die holder with cilindrical shank 15mm for tapping and drilling machines - Suitable for dies diameter 45mm and height 18mm

    Special Price €191.25 Regular Price €225.00
    (Incl. Tax: €233.32)
  33. 384.138B Portafiliera gambo cilindrico 12mm per maschiatrici, torni e trapani - Adatto per filiere Dia. 38mm, altezza 14mm

    384.138B Die holder with cilindrical shank 12mm for tapping and drilling machines - Suitable for dies diameter 38mm and height 14mm

    Special Price €178.50 Regular Price €210.00
    (Incl. Tax: €217.77)
  34. 172.300 Contropunte rotanti con attacco cilindrico e corsa di compressione 2mm per torni mono e plurimandrino - Fornite con cuspide Standard 60°

    172.300 Rotating live centres with compression stroke 2mm and cylindrical shank for single and multi-spindle lathes with Standard interchangeable insert 60°

    As low as €189.00
    (Incl. Tax: €230.58)
  35. 172.300F Contropunte rotanti con gambo cilindrico senza compressione per torni mono e plurimandrino - Fornite con cuspide Standard 60°

    172.300F Rotating live centres with cylindrical shank and without compression stroke for single and multi-spindle lathes with Standard interchangeable insert 60°

    As low as €193.50
    (Incl. Tax: €236.07)
  36. 100AR63 Camma standard radiale per Schütte SF67, SF81, SF100L, SFH200

    100AR63 Standard Radial Cam for Schütte SF67, SF81, SF100L, SFH200

    As low as €389.00
    (Incl. Tax: €474.58)
  37. 100AR80 Camma standard frontale per Schütte SF67, SF81, SF100 L, SFH200

    100AR80 Standard Frontal Cam for Lathes Schuette SF67, SF81, SF100 L, SFH200

    As low as €452.00
    (Incl. Tax: €551.44)
  38. 110E Pinza Stringibarra TONDA a compressione DIN 6343

    110E Collets ROUND suitable for Single-Spindle Lathes DIN 6343

    €48.00
    (Incl. Tax: €58.56)
  39. 109E F10 76-86 Collets ROUND >3mm on pressure for automatic Single-Spindle Lathes DIN 6343

    109E F10 76-86 Collets ROUND >3mm on pressure for automatic Single-Spindle Lathes DIN 6343

    €42.00
    (Incl. Tax: €51.24)
  40. Porta utensili per recessi interni per torni automatici

    Tool holder for internal recesses for automatic lathes - type 142

    As low as €327.25
    (Incl. Tax: €399.24)
  41. Tool holder for internal recesses for automatic lathes with collet ER16-ER20-ER25

    Tool holder for internal recesses for automatic lathes with collet ER16-ER20-ER25

    As low as €330.40
    (Incl. Tax: €403.09)
  42. 100AR63-95 Camme speciali radiali corta 95° per tornio Plurimandrino Schütte SF67, SF81, SF100L, SFH200

    100AR63-95 Special short 95° radial cam for multi-spindle automatic lathes Schütte SF67, SF81, SF100L, SFH200

    As low as €473.00
    (Incl. Tax: €577.06)
  43. Interchangeable Cuspids suitable for live centres with/without compression stroke 172.400 - 172.400F

    Interchangeable Cuspids suitable for live centres with/without compression stroke 172.400 - 172.400F

    As low as €24.00
    (Incl. Tax: €29.28)
  44. 172.400F Rotating live centres with cylindrical shank and without compression stroke for single and multi-spindle lathes with Standard interchangeable insert 60°

    172.400F Rotating live centres with cylindrical shank and without compression stroke for single and multi-spindle lathes with Standard interchangeable insert 60°

    As low as €216.48
    (Incl. Tax: €264.11)
  45. 160ER40ST Mandrini porta punta - pinza ER40 con ghiera tipo "STANDARD" DIN 6499

    160.000ST Collets chuck with "STANDARD" clamping nut DIN 6499, for ER collet, cylindrical shank, and shank length of your choice

    As low as €49.50
    (Incl. Tax: €60.39)
  46. 653-101 Coaxial edge finders for inside and outside with stainless steel rotating parts - 3 + 3 arms for internal/external

    653-101 Coaxial edge finders for inside and outside with stainless steel rotating parts - 3 + 3 arms for internal/external

    €214.00
    (Incl. Tax: €261.08)
  47. 575.002Q Plastic case set of 7 Limit plug gauges “GO” and “NO GO”, precision H7, Sizes diameter 3 - 4 - 5 - 6 - 8 - 10 - 12mm

    575.002Q Plastic case set of 7 Limit plug gauges “GO” and “NO GO”, precision H7, Sizes diameter 3 - 4 - 5 - 6 - 8 - 10 - 12mm

    €178.00
    (Incl. Tax: €217.16)
  48. 515.010 Sets of 10 Gauge block set for micrometer 0:25mm check, grade 1, Hardened steel ± 63 HRC

    515.010 Sets of 10 Gauge block set for micrometer 0:25mm check, grade 1, Hardened steel ± 63 HRC

    €244.00
    (Incl. Tax: €297.68)
View as Grid List

Items 49-96 of 211

Set Descending Direction
per page
Page
Shop By filter
Shopping Options
Brand
Application
Machine Type
Work material (ISO)
Cutting Material
Drilling depth
Typology
Diameter "d1" mm
Lengt "L1"
Resolution (mm)
Measurements range
Size
Shank Type
Dimension of thread
High "H" mm
Length "L"
Dimension "X"
Diameter "D" mm
Width "W"
Stroke "h"
Code
Angle of Work
Price