Lifting equipment

LTF hand-held magnetic lifters are made of high-quality neodymium magnets, this gives them
- high anchoring force
- unlimited number of operations
- small overall dimensions and low weight

Thanks to their prismatic base, they are the quickest means of lifting and handling rigid ferrous loads of suitable thickness with flat or round surfaces. The magnetic flux is engaged and disengaged by means of a lever located on the front of the lifters.
Maximum operating temperature 80°C. Safety factor 3:1.

Built according to CE directives.

Set of 2 lifters and 1 lever

For transporting heavy objects such as cabinets, machinery, etc.

Frame made of electro-galvanised sheet steel

Rubber-protected contact surfaces, polyurethane-coated wheels

Built according to CE directives.

- Suitable for vertical lifting, 180° rotation and lateral clamping of sheets, plates, profiles, beams, etc.

- The cam locking device allows safe working and enables the clamp to remain clamped even in the absence of tension

- Minimum load is 20% of maximum capacity

- The surface hardness of the transported goods must not exceed 30 HRC

- Built according to EC directives.

The Unicraft brand anchor clamp model TK1 allows the creation of temporary or permanent anchor points for a maximum load capacity of 1 tonne. Used for placing pulleys and hoists.

The gripper is characterised by secure clamping and great flexibility. The gripper has an adjustable gripping capacity from a minimum of 75 mm to a maximum of 220 mm.

Built in accordance with EC directives.

- No lateral displacement on the beam due to the centred suspension of the hoist
- Adjustment is made by a forked load bar with coupling thread that avoids the
inclinations
- Low height and compact design
- Designed for use on INP, IPE and BP type lifting beams
- The rollers absorb vertical and horizontal movements and allow smooth and precise sliding on the girders

Built in accordance with EC directives.

- No lateral displacement on the beam due to the centred suspension of the hoist
- Adjustment is made by a forked load bar with threaded coupling safety against
inclinations
- Low height and compact design
- Designed for use on INP, IPE and BP type lifting beams
- The rollers absorb vertical and horizontal movements and allow smooth and precise sliding on the girders

Built in accordance with EC directives.

Hydraulic binder model MH 10 for safe lifting of heavy loads.

Robust welded steel construction.

Adjustable lowering speed via dump valve.

Small and compact construction.

Height-adjustable base.

Scratch-resistant paintwork.