Machine tools for wood

Supplied with: Ø 75 mm polishing wheel, Ø 75 mm grinding wheel, flex shaft with mounted point with Ø 3 mm shank, grinding wheel guard and wrenches.

- For cutting edges on plastic or panels
- For cutting flush or 90° edges with protrusions or assembled edges

- Ideal for edging and edge trimming even on large workpieces
- Easy to fit and remove on workpieces thanks to quick-release lever
- Suction cup attachment guarantees ideal conditions when processing workpiece top and bottom edges

- Delicate surfaces can be secured without being damaged.
- Vacuum generated by compressed air, connection via connection to an external compressor. No vacuum pump required.
- Can be used for sanding, planing, milling, cutting, painting, and much more.
- For working with large workpieces, several tables can be combined using supplied accessories.
- For direct assembly on the work table.

- Delicate surfaces can be secured without being damaged.
- Vacuum generated by compressed air, connection via connection to an external compressor. No vacuum pump required.
- Can be used for sanding, planing, milling, cutting, painting, and much more.
- For working with large workpieces, several tables can be combined using supplied accessories.
- Easy to assemble and disassemble on a work surface thanks to a clamp.

- Ideal for hobbyists
- For dry and wet grinding
- Many different tool fasteners also compatible with machines from other manufacturers
- Grinding wheel designed to withstand water and to last a long time
- Low speed in combination with cooling allows working at low temperatures so as not to affect the hardness of materials
- Powerful induction motor for quiet and vibration-free operation
- Special noble corundum grinding wheel with aluminium oxide for perfect grinding results even with steel harder than 60 HRC (tool steel)
- Removable leather disc for burr removal after sharpening Abrasive paste for polishing the tool after sharpening
- Angle gauge for setting the correct sharpening angle
- Motor and switch protected against splash water
- Water tank protected against breakage

Cut comfortably and precisely with the FERM CSM1039 circular saw. Depending on the blade fitted, the machine can be used with different materials such as wood, plasterboard, plastic, aluminium and tiles. Thanks to the adjustable footboard, the machine can be used for cutting angles between 45 and 90 degrees. The saw is equipped with a parallel guide for precise cutting results and an ergonomic handle. Thanks to the extra-long 3-metre power cable, operation is optimal.

- Blade compatible with 185 mm circular saws.
- Dimensions 185 x 20 mm
- TCT tungsten carbide coating
- 24 teeth
- Can be used with FERM CSM1039 circular saw.