Lifting and handling systems

Scissor lift pallet truck model PHH 1003 E with robust electro-hydraulic lifting device.

Hydraulic pump with chrome-plated piston and overload valve.

Both electric and manual operation.

Flow regulator for constant speed fork descent.

Very stable, torsion-resistant monocoque structure.

Ergonomic, non-slip, plastic-coated drawbar.

Easy to manoeuvre thanks to 210° steering angle.

Quiet movement due to aluminium wheels with rubber treads and polyurethane rollers.

Wheels and rollers mounted on maintenance-free bearings.

The batteries have an autonomy of 5 hours (12 V/60 Ah).

The LED display shows the battery charge status.

Equipped with double side stabilisers that come into operation when the forks are raised above a certain height.

Forklift truck model GHHW 1000 particularly suitable for loading and unloading from vehicles, facilitates moving loads in warehouses, useful both for stacking and for short transports.

Robust steel construction with high-quality welded seams.

Lifting driven by manual hydraulic pump.

Its compact design allows it to be used even in tight spaces.

Equipped with maintenance-free guide rollers and pivoting nylon wheels mounted on ball bearings.

Lifting is operated by foot pedal or hand lever.

Stable construction with large wheels and polyurethane rollers.

The ergonomic drawbar can be manoeuvred with one hand and the plastic cover provides great comfort.

Electric lifting platform with U-shaped table model SHT 1001 U.

Optimum height allows ergonomic working.

Foldable platform for easy storage.

Loading ramp included to facilitate trans pallet movement.

Separate control unit with 3 metre cable, control buttons and emergency switch.

Stable, powder-coated steel construction. Meets EN 1570 safety standards.

Chrome-plated piston rod.

Built with U-shaped table for easy access to pallet trucks.

Hydraulic lift platform model SHT 1000.

Optimum height allows ergonomic working, foldable platform for easy storage, separate control unit with 3 metre cable, control buttons and emergency switch, stable powder-coated steel construction, protective rails, complies with EN 1570 safety standards, high-pressure cylinders with double safety function.

LTF hand-held magnetic lifters are made of high-quality neodymium magnets, this gives them
- high anchoring force
- unlimited number of operations
- small overall dimensions and low weight

Thanks to their prismatic base, they are the quickest means of lifting and handling rigid ferrous loads of suitable thickness with flat or round surfaces. The magnetic flux is engaged and disengaged by means of a lever located on the front of the lifters.
Maximum operating temperature 80°C. Safety factor 3:1.

Built according to CE directives.

The Unicraft brand anchor clamp model TK1 allows the creation of temporary or permanent anchor points for a maximum load capacity of 1 tonne. Used for placing pulleys and hoists.

The gripper is characterised by secure clamping and great flexibility. The gripper has an adjustable gripping capacity from a minimum of 75 mm to a maximum of 220 mm.

Built in accordance with EC directives.

- No lateral displacement on the beam due to the centred suspension of the hoist
- Adjustment is made by a forked load bar with coupling thread that avoids the
inclinations
- Low height and compact design
- Designed for use on INP, IPE and BP type lifting beams
- The rollers absorb vertical and horizontal movements and allow smooth and precise sliding on the girders

Built in accordance with EC directives.

- No lateral displacement on the beam due to the centred suspension of the hoist
- Adjustment is made by a forked load bar with threaded coupling safety against
inclinations
- Low height and compact design
- Designed for use on INP, IPE and BP type lifting beams
- The rollers absorb vertical and horizontal movements and allow smooth and precise sliding on the girders

Built in accordance with EC directives.

UNICRAFT - UNI6150100 Scissor lift pallet truck with hydraulic lifting and lowering device, load capacity 1t, fork length 1150mm

- The sprockets and pinion mounted on roller bearings increase efficiency and reduce friction, improving working conditions.

- Swivel hook with safety lock

- Safe load pick-up

- Speed controlled by pressure brake with asbestos-free discs

- Built in accordance with EC directives.