Main collets of various brand and models for multi-spindle and single-spindle turning machines.
The main collets are mainly divided into two families: Pulling bar end clamps are equipped with a thread at the rear of the cone, which can be either external or internal. The thread serves to secure the clamp to the clamping rod, which determines the opening or closing of the clamp during its axial movement. Compression-type clamps have no thread for mounting. They are mounted inside the chuck via an external ring nut on the chuck nose. The axial movement that performs the closing of the bar clamp is usually performed with a sleeve or tube.
The clamps will be supplied according to the available profiles, should you require a particular profile please write to us click here
-
1212E - F16 Collets ROUND for Single-Spindle Lathes DIN 6343 for Citizen L12X
Made of high quality steel that does not alter the accuracy and characteristics when the temperature changes during chip removal operations.
Excellent value for money
The dimensions correspond to the chosen product, but the design and images shown are indicative and not proportionate.
The main collets will be supplied according to the available profiles, if you need a particular profile please write to us by clicking here
Delivery: about one week from order
Learn More
€48.00 -
F16-1212E Round compression collet prepared for part ejection for Citizen L12X
The collet is made from the same special steel used to make our F16-1212E collets, which allows the metallurgical, mechanical and precision characteristics to be maintained over time and as the operating temperature changes.
Learn More
We have modified the collet to allow not only the clamping of the part in the collet, but also the ejection of the part, making the collet with the ejector in one piece. The advantage of this operation is the simple adjustment of the workpiece ejection and the positioning of the ejector concentric to the collet bore.
By disassembling the ejector, the collet can become not only a workpiece gripper, but also the classic collet for use with the main spindle€42.00 -
SK80BZI Clamping collet with max. bar capacity 80 mm for CNC lathes, compatible with HAINBUCH chucks
Compatible with original HAINBUCH chucks.
The collets are composed of metal inserts joined by vulcanized rubber. This allows perfect radial closure by locking the piece along the entire length of the hole and eliminates the intrusion of chips inside the spindle. Applied to the main spindle of the lathe, they are suitable for bar machining. Furthermore, the constructive ductility of the system allows easy specific solutions (drawn bars, laminates, tubes).
Delivery times: will be communicated via email.
Learn More€265.00 -
016070 Double cone collet ROUND for single-spindle lathes Ø91 - L=100, BIGLIA
Delivery times: will be communicated via email
Learn More€136.00 -
016024 Double cone collet ROUND for single-spindle lathes Ø34 - L=56
Delivery times: will be communicated via email
Learn MoreContact us by Email info@tadaahshop.com for price -
016052 Double cone collet ROUND for single-spindle lathes Ø34.5 - L=74
Delivery times: will be communicated via email
Learn MoreContact us by Email info@tadaahshop.com for price -
016054 Double cone collet ROUND for single-spindle lathes Ø26 - L=55
Delivery times: will be communicated via email
Learn MoreContact us by Email info@tadaahshop.com for price -
016055 Double cone collet ROUND for single-spindle lathes Ø50 - L=80
Delivery times: will be communicated via email
Learn MoreContact us by Email info@tadaahshop.com for price -
016043 Double cone collet ROUND for single-spindle lathes Ø60 - L=80
Delivery times: will be communicated via email
Learn MoreContact us by Email info@tadaahshop.com for price -
016056 Double cone collet ROUND for single-spindle lathes Ø69.5 - L=100
Delivery times: will be communicated via email
Learn MoreContact us by Email info@tadaahshop.com for price
