Language

Hello Guest!
Your Cart 0
€0.00
Feed finger

Bar feed finger collet

the counter collet are preloaded in order to be able to carry out a correct advancement of the bar without creating any problems for the single-spindle - multi-spindle lathe and above all guaranteeing precision in the advancement of the bar, in order to avoid the creation of short and defective pieces. The bar feed finger pliers are made with a sliding load calibrated by the manufacturer according to the material used by the pliers which is normally divided into three groups, for steel, for aluminum and for brass. The load is calculated based on the specific weight and the diameter and/or profile of the bar.

Plastic collet for bar feeding

Plastic bar feed finger are used for multi-spindle and single-spindle CNC lathes and has a high wear resistance, the average duration is 5/15 km of bars according to the pressure that develops on them. Excellent vibration absorption, sensitive damping capacity due to the characteristics of the thermoplastic materials. The feed gripper has resistance to centrifugal force. The counter pliers have a cylindrical body without longitudinal cuts, this guarantees high resistance to centrifugal force and therefore to wear (from 4000 to 7000 rpm), the bar feed clamp are compatible with the originals. Available drilled to size or solid to be drilled. It should be taken into consideration that after total wear of the hole, it is possible to regenerate the collet by enlarging the hole itself.

All the collets on display are interchangeable with the original ones suitable for multi-spindle and single-spindle CNC lathes including Gildemeister DMG-Mori, Davenport, Acme - Gridley, Index, Mori-say, Pittler – Drema - Dam, Schutte, Tos, Tornos, Wickmann and many others…

View as List Grid

Items 1-10 of 15

Set Descending Direction
per page
Page
  1. 9288E Feed Finger Hex 15 for Gildemeister AS16- AS/GS/GM20 capacity 25mm

    Delivery: At store

    Learn More
    €280.00
    (Incl. Tax: €341.60)
  2. 9288E Feed Finger Hex 10 for Gildemeister AS16/AS/GS/GM20 capacity 25mm

    Delivery: At Store

    Learn More
    €280.00
    (Incl. Tax: €341.60)
  3. 9888E Feed Finger Hex19 suitable for Gildemeister AS16- AS/GS/GM20 capacity 25mm

    Delivery: At store

    Learn More
    €280.00
    (Incl. Tax: €341.60)
  4. 9258E Body for insert RS20 feed finger adjustable, suitable for Gildemeister DMG-Mori AS16/20, GS20, GM20, GM20AC - Mori-Say 6/20 - Tornos MD20/6

    Delivery time: about 1 week

    Learn More
    €58.00
    (Incl. Tax: €70.76)
  5. RS20, SQUARE quick change insert for feed collet 9258EH suitable for Gildemeister AS20, GS20, GM20, 20mm series, Mori-Say 6/20 - Tornos MD20/6

    Insert for feed collet with adjustable sliding load.

    Delivery time: about 1 week

    Learn More
    €55.00
    (Incl. Tax: €67.10)
  6. 013.924 RS24 ROUND quick change insert for feed collet 9288E, Gildemeister DMG-Mori AS16, AS20, GS20, GM20, GM20AC, Series 25mm

    Inserto per pinza spingibarra con carico di scorrimento regolabile.

    Tempi di consegna:  circa 1 settimana

    Learn More
    €44.00
    (Incl. Tax: €53.68)
  7. 013.924 RS24 HEXAGONAL quick change insert for feed collet 9288E suitable for Gildemeister DMG-Mori AS16, AS20, GS20, GM20, series 25mm

    Insert RS24 for feed collet with adjustable sliding load.

    Delivery time: about 1 week

    Learn More
    €55.00
    (Incl. Tax: €67.10)
  8. 013.924 RS24 SQUARE quick change insert for feed collet 9288E, Gildemeister DMG-Mori AS16, AS20, GS20, GM20, series 25mm

    Insert RS24 for feed collet with adjustable sliding load.

    Delivery time: about 1 week

    Learn More
    €60.00
    (Incl. Tax: €73.20)
  9. 9288E Feed Finger ROUND suitable for Gildemeister AS16, AS20, GS20, GM20, GM20AC, capacity 25mm

    The Bar Feed finger collets are made with a sliding/frictional load set by the manufacturer. This is based on the material that is being fed by the collet, as well as size and profile. We divide these into 3 clear groups, for steel, aluminium and brass.

    Delivery: about 7 days

    Learn More
    €29.00
    (Incl. Tax: €35.38)
  10. 9258E Feed Finger ROUND for Gildemeister AS16- AS/GS/GM20 Capacity 20mm, Mori-Say 6/20

    The Bar Feed finger collets are made with a sliding/frictional load set by the manufacturer. This is based on the material that is being fed by the collet, as well as size and profile. We divide these into 3 clear groups, for steel, aluminium and brass.

    Delivery: about 7 days

    Learn More
    €26.00
    (Incl. Tax: €31.72)
View as List Grid

Items 1-10 of 15

Set Descending Direction
per page
Page
WhatsApp Chat WhatsApp Chat