Language

Hello Guest!
Your Cart 0
€0.00
Feed finger

Bar feed finger collet

the counter collet are preloaded in order to be able to carry out a correct advancement of the bar without creating any problems for the single-spindle - multi-spindle lathe and above all guaranteeing precision in the advancement of the bar, in order to avoid the creation of short and defective pieces. The bar feed finger pliers are made with a sliding load calibrated by the manufacturer according to the material used by the pliers which is normally divided into three groups, for steel, for aluminum and for brass. The load is calculated based on the specific weight and the diameter and/or profile of the bar.

Plastic collet for bar feeding

Plastic bar feed finger are used for multi-spindle and single-spindle CNC lathes and has a high wear resistance, the average duration is 5/15 km of bars according to the pressure that develops on them. Excellent vibration absorption, sensitive damping capacity due to the characteristics of the thermoplastic materials. The feed gripper has resistance to centrifugal force. The counter pliers have a cylindrical body without longitudinal cuts, this guarantees high resistance to centrifugal force and therefore to wear (from 4000 to 7000 rpm), the bar feed clamp are compatible with the originals. Available drilled to size or solid to be drilled. It should be taken into consideration that after total wear of the hole, it is possible to regenerate the collet by enlarging the hole itself.

All the collets on display are interchangeable with the original ones suitable for multi-spindle and single-spindle CNC lathes including Gildemeister DMG-Mori, Davenport, Acme - Gridley, Index, Mori-say, Pittler – Drema - Dam, Schutte, Tos, Tornos, Wickmann and many others…

View as List Grid

3 Items

Set Descending Direction
per page
  1. 9372E Bar feed finger collet ROUND for Schütte AD40, SF42, Mori-Say 6/42 - 8/42, EUROTURN 42

    The Bar Feed finger collets are made with a sliding/frictional load set by the manufacturer. This is based on the material that is being fed by the collet, as well as size and profile. We divide these into 3 clear groups, for steel, aluminium and brass.

    Delivery: about 7 days

    Learn More
    €53.00
    (Incl. Tax: €64.66)
  2. 9372E Bar feed finger collet EXAGONAL for Schütte AD40, SF42, Mori-Say 6/32 - M8/42

    The Bar Feed finger collets are made with a sliding/frictional load set by the manufacturer. This is based on the material that is being fed by the collet, as well as size and profile. We divide these into 3 clear groups, for steel, aluminium and brass.

    Delivery: about 7 days

    Learn More
    €64.00
    (Incl. Tax: €78.08)
  3. 9372E Plastic bar feed fingers collet ROUND - HEXAGONAL suitable for multi spindle lathes Schuette AD40-SF40-SF42 thread M48x1.5mm

    Delivery: about 1 week, with confirmation by email

    For the hexagonal bars the collets will be made in the round version with the hole being made on the circumscribed theoretical diameter of the hexagon

    Learn More
    Special Price €123.00 Regular Price €164.00
    (Incl. Tax: €150.06)
View as List Grid

3 Items

Set Descending Direction
per page
WhatsApp Chat WhatsApp Chat