Bar Bushing - Carbide bush - Feed finger - Main collets - Barloader Collets
Piece clamping collet - Tool clamping collets
Bar guide bushes used to guide the bar to be machined for mechanical and CNC lathes.
The adjustable hard metal bush is used in sliding headstock lathes to support the bar during machining of the workpiece. The HM guide bush is manufactured according to the diameter of the bar to be machined and the hole drilled in the bush is perfectly precise and smooth. Being cut transversely along the axis, by acting on a ring nut and counter nut, we can adjust the diameter of the hole so that the bar slides perfectly without interference and above all without play.
The feed finger is mounted inside the lathe spindle, on the bar push rod or on the automatic bar feeder of a lathe, is used to feed and push the bar forward to automatically produce all available parts, until the bar is exhausted. The feed finger is replaced for each change in diameter of the bar to be machined.
The bar clamp is mounted inside the spindles of a lathe and is used to clamp the bar or workpiece during the execution of a turning or drilling operation using cutting tools. The main collet is used on lathe, multi-spindle automatic lathes, CNC lathes, sliding headstock lathes, fixed headstock lathes, lathes with bar machining, workpiece reworking, component assembly, etc.
The purpose of the barloader collets for barfeeders is to advance the bar whenever the lathe has produced a part and is ready to start a new work cycle. The barloader feeder pusher grippers are housed on a lance. The end of the bar is inserted frontally into the collet, which holds it elastically by opening the petals.
The pick-up workpiece collet is mounted on the pick-up spindle or counter spindle to support the workpiece during the cutting operation or to perform any drilling or turning operations on the rear of the turned workpiece.
ER collets made of steel are used on all machine tools that use rotating tools (milling machines, CNC milling machines, machining centres, boring machines, drills, screwdrivers) as well as on machine tools where we have the workpiece in rotation (parallel lathes, automatic lathes, CNC lathes). The ER collet has a very wide range of uses, from joinery to mechanical engineering. ER collets come in different sizes, the number following the ER abbreviation (ER8, ER11, ER16, ER20, ER25, ER32, ER40, ER50) indicates the cone size and the maximum shank diameter that each model can hold.
High-precision cylindrical reduction sleeves for clamping tools in hydraulic clamping chucks.
-
J9 Hard metal bushing Ø23mm for lathe CNC, Citizen, Gildemeister, Hanwha, Maier, Manurhin, Nexturn, Star, Tornos, Tsugami
Citizen: C32, E32, L32, M32, M2-32
Gildemeister: Speed32-10 linear, GLD 25-5 assi, GLD 32-5/6 assi
Hanwha: SL32S/HE, SL32HP II, SL32HPD, STL32H
Maier: ML32
Manurhin: Mirabel PM32, Swing32, XL32
Nexturn: SA32D, SA32E
Star: JNC25, JNC32, VNC32, KNC25A, KNC25B, KNC32A, KNC32B, ECAS32T, SR32, SV32, SV32J, SV32J II
Tornos: DECO26 used with rotating bush only, SIGMA32
Tsugami: NT-NP32, NT-NP32-II
Learn More€345.50
(Incl. Tax: €421.51) -
J9 Hard metal bushing for lathe CNC-Citizen-Gildemeister-Hanwha-Maier-Manurhin-Nexturn-Star-Tornos-Tsugami
Citizen: C32, E32, L32, M32, M2-32Gildemeister: Speed32-10 linear, GLD 25-5 assi, GLD 32-5/6 assiHanwha: SL32S/HE, SL32HP II, SL32HPD, STL32HMaier: ML32Manurhin: Mirabel PM32, Swing32, XL32Nexturn: SA32D, SA32EStar: JNC25, JNC32, VNC32, KNC25A, KNC25B, KNC32A, KNC32B, ECAS32T, SR32, SV32, SV32J, SV32J IITornos: DECO26 used with rotating bush only, SIGMA32Tsugami: NT-NP32, NT-NP32-IILearn MoreAs low as €182.50
(Incl. Tax: €222.65) -
RC32 High-precision shank Ø32 sleeve for spindles or hydraulic clamping applications hole Ø23mm
High-precision reduction sleeve for use on spindles, collet applications, hydraulically locked with bore diameter in the pictures. Mainly used to ensure the accuracy of closing on the axis. Not suitable for high load torque and/or torsion.
Maximum oscillation error: 3 microns over a length of 2 times the dimension "X"
Learn More -
B227 Hard metal bushing for lathe CNC-Citizen-Gildemeister-Hanwha-Maier-Manurhin-Nexturn-Star-Tornos-Traub-Tsugami
Citizen: L25, E25, F25Gildemeister: Speed 20-8 Linear, Speed 20-11 Linear, GLD 25-4/5 assi, GD 26-5/6 assiHanwha: SL 26S/H, SL 26HP IIMaier: ML26Manurhin: KMX26-KMX226, Swing 26, Swing 32, First–226-326CNexturn: SA 26D, SA 26EStar: SNC 25DX, KJR 25A, KJR 25BTornos: DECO20, DECO26Traub: TNL 26 (seriel 301 & +), TNL 26Tsugami: BA 26, BU 26, BS26, BU/MU 26Learn MoreAs low as €150.00
(Incl. Tax: €183.00) -
B227 Hard metal bushing Ø23mm for lathe CNC Citizen, Gildemeister, Hanwha, Maier, Manurhin, Nexturn, Star, Tornos, Traub, Tsugami
Citizen: L25, E25, F25
Gildemeister: Speed 20-8 Linear, Speed 20-11 Linear, GLD 25-4/5 assi, GD 26-5/6 assi
Hanwha: SL 26S/H, SL 26HP II
Maier: ML26
Manurhin: KMX26-KMX226, Swing 26, Swing 32, First–226-326C
Nexturn: SA 26D, SA 26E
Star: SNC 25DX, KJR 25A, KJR 25B
Tornos: DECO20, DECO26
Traub: TNL 26 (seriel 301 & +), TNL 26
Tsugami: BA 26, BU 26, BS26, BU/MU 26
Learn More€319.50
(Incl. Tax: €389.79) -
472E PRT TOOLS Ultra precision collet chucks ER40 for clamping tools with cylindrical shank DIN 6499/B
Ultra Precision ER40 spring collet DIN 6499/B for clamping drill and tools with cylindrical shank. Resistant and practical for general use. The ER collet is the most widely used clamping system in the world. Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. They are ground both externally and internally then a superfinishing step is performed which guarantees an incredible surface finish of Rz 2.5.
Learn MoreAs low as €26.20
(Incl. Tax: €31.96) -
PRT TOOLS Collet ER40 Watertight DIN 6499/B
ER40 Watertight Collet to DIN 6499/B Resistant and practical for general use.
The ER collet is the most widely used clamping system in the world. Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding.
They are ground both externally and internally then a superfinishing step is performed which guarantees an incredible surface finish of Rz 2.5.Learn MoreAs low as €38.20
(Incl. Tax: €46.60) -
EPR40230UP PRT TOOLS 472E Ultra precision collet chuck ER40 for clamping tools with cylindrical shank DIN 6499/B - Diameter 23mm
Ultra Precision ER40 spring collet DIN 6499/B for clamping drill and tools with cylindrical shank. Resistant and practical for general use. The ER collet is the most widely used clamping system in the world. Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. They are ground both externally and internally then a superfinishing step is performed which guarantees an incredible surface finish of Rz 2.5.
Learn More€26.20
(Incl. Tax: €31.96) -
PRT TOOLS - EOP25 Clamping collet DIN 6388/B for collet chuck with various diameters of your choice
As low as €10.69
(Incl. Tax: €13.04)