Bar Bushing - Carbide bush - Feed finger - Main collets - Barloader Collets
Piece clamping collet - Tool clamping collets
Bar guide bushes used to guide the bar to be machined for mechanical and CNC lathes.
The adjustable hard metal bush is used in sliding headstock lathes to support the bar during machining of the workpiece. The HM guide bush is manufactured according to the diameter of the bar to be machined and the hole drilled in the bush is perfectly precise and smooth. Being cut transversely along the axis, by acting on a ring nut and counter nut, we can adjust the diameter of the hole so that the bar slides perfectly without interference and above all without play.
The feed finger is mounted inside the lathe spindle, on the bar push rod or on the automatic bar feeder of a lathe, is used to feed and push the bar forward to automatically produce all available parts, until the bar is exhausted. The feed finger is replaced for each change in diameter of the bar to be machined.
The bar clamp is mounted inside the spindles of a lathe and is used to clamp the bar or workpiece during the execution of a turning or drilling operation using cutting tools. The main collet is used on lathe, multi-spindle automatic lathes, CNC lathes, sliding headstock lathes, fixed headstock lathes, lathes with bar machining, workpiece reworking, component assembly, etc.
The purpose of the barloader collets for barfeeders is to advance the bar whenever the lathe has produced a part and is ready to start a new work cycle. The barloader feeder pusher grippers are housed on a lance. The end of the bar is inserted frontally into the collet, which holds it elastically by opening the petals.
The pick-up workpiece collet is mounted on the pick-up spindle or counter spindle to support the workpiece during the cutting operation or to perform any drilling or turning operations on the rear of the turned workpiece.
ER collets made of steel are used on all machine tools that use rotating tools (milling machines, CNC milling machines, machining centres, boring machines, drills, screwdrivers) as well as on machine tools where we have the workpiece in rotation (parallel lathes, automatic lathes, CNC lathes). The ER collet has a very wide range of uses, from joinery to mechanical engineering. ER collets come in different sizes, the number following the ER abbreviation (ER8, ER11, ER16, ER20, ER25, ER32, ER40, ER50) indicates the cone size and the maximum shank diameter that each model can hold.
High-precision cylindrical reduction sleeves for clamping tools in hydraulic clamping chucks.
-
3263E Pick-up collet EXAGONAL for Tornos AS14, SAS16
To complete the order you must fill the boxes above depending on whether the measurement is integer or decimal:
if it measures whole, completes the first box, if it measures decimal, the second box.
The dimensions correspond to the chosen product, but the design and the images shown are indicative and not proportionate.
Learn More€87.00
(Incl. Tax: €106.14) -
3263E - F16 830 Pick-up collet ROUND for Tornos AS14, SAS16
To complete the order you must fill the boxes above depending on whether the measurement is integer or decimal:
if it measures whole, completes the first box, if it measures decimal, the second box.
The dimensions correspond to the chosen product, but the design and the images shown are indicative and not proportionate.
Learn More€42.00
(Incl. Tax: €51.24) -
ER16 High Precision & Coolant Sealing Collet
ER16 High Precision & Coolant Sealing Collet to DIN 6499 / B. Resistant and practical for general use.
The ER collet is the most widely used clamping system in the world.
Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding.They are ground both externally and internally then a superfinishing step is performed which guarantees an incredible surface finish of Rz 2.5.
Learn More
€44.00
(Incl. Tax: €53.68) -
ER20 High Precision & Coolant Sealing Collet
ER20 High precision and watertight DIN 6499/B gripper, resistant and practical, ideal for all types of use.
Closing capacity 0.5mm up to Ø3mm over, closing capacity 1mm up to Ø13mm.
The degree of concentricity of the high precision ER clamps - DIN 6499/B is contained in 0,005 mm.
They are made of spring steel.
They are ground both externally and internally; after this processing, a superfinishing phase is carried out which guarantees a degree of roughness lower than Rz 2,5.
Learn More€45.00
(Incl. Tax: €54.90) -
ER20 Collet, Square drive for tapping
ER20 Collet, Square Drive for Tapping to DIN 6499 / B. Resistant and practical for general use.
The ER collet is the most widely used clamping system in the world.
Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding.They are ground both externally and internally then a superfinishing step is performed which guarantees an incredible surface finish of Rz 2.5.
Learn More€34.00
(Incl. Tax: €41.48) -
ER16 Squared rigid collet for tapping with watertight DIN 6499/B
ER16 Squared rigid collet for tapping with watertight DIN 6499/B, durable and practical, ideal for all kinds of applications.
The degree of concentricity of the ER collets - DIN 6499/B Standard is 0.01 mm.
They are made of spring steel.
They are ground both externally and internally; after this process, a superfinishing phase is carried out which guarantees a degree of roughness lower than Rz 2.5.
Learn More€42.00
(Incl. Tax: €51.24) -
120E -F15-580 Collets ROUND for Single-Spindle Lathes DIN 6343 for Feinler FA10, Gauthier GM12, Strohm 105 - 125 , Tornos R10
Made of high quality steel that does not alter the accuracy and characteristics when the temperature changes during chip removal operations.
Excellent value for money
The dimensions correspond to the chosen product, but the design and images shown are indicative and not proportionate.
The main collets will be supplied according to the available profiles, if you need a particular profile please write to us by clicking here
Delivery: about one week from order
Learn More
€20.00
(Incl. Tax: €24.40) -
1212E - F16 Collets ROUND for Single-Spindle Lathes DIN 6343 for Citizen L12X
Made of high quality steel that does not alter the accuracy and characteristics when the temperature changes during chip removal operations.
Excellent value for money
The dimensions correspond to the chosen product, but the design and images shown are indicative and not proportionate.
The main collets will be supplied according to the available profiles, if you need a particular profile please write to us by clicking here
Delivery: about one week from order
Learn More Contact us by Email info@tadaahshop.com for price -
F16-1212E Round compression collet prepared for part ejection for Citizen L12X
The collet is made from the same special steel used to make our F16-1212E collets, which allows the metallurgical, mechanical and precision characteristics to be maintained over time and as the operating temperature changes.
Learn More
We have modified the collet to allow not only the clamping of the part in the collet, but also the ejection of the part, making the collet with the ejector in one piece. The advantage of this operation is the simple adjustment of the workpiece ejection and the positioning of the ejector concentric to the collet bore.
By disassembling the ejector, the collet can become not only a workpiece gripper, but also the classic collet for use with the main spindle€48.00
(Incl. Tax: €58.56)
