Language

Hello Guest!
Your Cart 0
€0.00
View as List Grid

Items 1-10 of 78

Set Descending Direction
per page
Page
  1. UNICRAFT 6350100 - Swivel bench vice with pipe jaws, jaw width 100mm, VICE model

    - Vises with front opening, superior workmanship, made of highly resistant hardened steel

    - Replaceable hardened jaws

    - Adjustable guide for parallel gripping

    - Ideal for plumbers due to jaws that allow pipe clamping

    - Large hardened anvil surface

    - Closed screw guide offering optimum protection against damage and dirt

    - 360° swivel base with stop option

    - Painted blue with hammered effect

    - Built according to CE directives

    STANDARD EQUIPMENT:

    - Swivel plate

    - Jaws

    Learn More
    Special Price €106.20 Regular Price €118.00
  2. UNICRAFT 6350125 - Swivel bench vice with pipe jaws, jaw width 125mm, VICE model

    - Vises with front opening, superior workmanship, made of highly resistant hardened steel

    - Replaceable hardened jaws

    - Adjustable guide for parallel gripping

    - Ideal for plumbers due to jaws that allow pipe clamping

    - Large hardened anvil surface

    - Closed screw guide offering optimum protection against damage and dirt

    - 360° swivel base with stop option

    - Painted blue with hammered effect

    - Built according to CE directives

    STANDARD EQUIPMENT:

    - Swivel plate

    - Jaws

    Learn More
    Special Price €130.89 Regular Price €152.20
  3. UNICRAFT 6350175 - Swivel bench vice with pipe jaws, jaw width 175mm, VICE model

    - Vises with front opening, superior workmanship, made of highly resistant hardened steel

    - Replaceable hardened jaws

    - Adjustable guide for parallel gripping

    - Ideal for plumbers due to jaws that allow pipe clamping

    - Large hardened anvil surface

    - Closed screw guide offering optimum protection against damage and dirt

    - 360° swivel base with stop option

    - Painted blue with hammered effect

    - Built according to CE directives

    STANDARD EQUIPMENT:

    - Swivel plate

    - Jaws

    Learn More
    Special Price €262.64 Regular Price €305.40
  4. 772065 Pneumatic chucking vice suitable for collets 787 E - 788 E, compatible with original HAINBUCH spindles

    Pneumatic vices are used for clamping workpieces on production machines such as machining centres, transfer machines, drills and for the assembly of various parts. The workpiece is clamped by means of an interchangeable gripper housed inside the device; the advantage over other clamping systems is the perfect centring of the workpiece.

    They are designed with a double-acting pneumatic system; both closing and opening of the gripper are pneumatic without the use of springs to return the sleeve. The external body of the device is designed to be fixed on the machine tool in both horizontal and vertical positions. The pneumatic vices are made of certified high-alloyed hardened and ground steel.

    The modular vices are designed with a pneumatic toggle system that allows high clamping force on the workpiece despite the overall dimensions being much smaller than standard pneumatic vices. Particularly with this product, the clamping capacity is increased up to diameter 65 with HAINBUCH compatible quick-change collets.

    Optional accessories available on request by e-mail.

    Learn More
    Special Price €1,200.00 Regular Price €1,500.00
  5. 772115 Modular pneumatic vice for main push collets 140E - BA15 suitable for Feinler, Index, Tarex, Traub

    The modular pnuematic vise is designed with a double-acting pneumatic system with toggle power multiplier that allows for high clamping force on the workpiece despite the overall dimensions being much smaller than standard pneumatic vises.

    Both closing and opening of the clamp are pneumatic without the use of springs for the return of the sleeve.

    The support planes for vertical and horizontal clamping and the gripper clamping system are completely ground and guarantee a clamping linearity <0.02.

    The clamp locking system is made of highly alloyed, hardened and tempered case-hardening steel with a hardness of 58 ± 2 HRC.

    The clamp's characteristics make it suitable both for single use on conventional machines and for series use on machining centres. Standard delivery includes the two brackets for single clamping.

    Learn More
    €633.00
  6. 772142 Modular pneumatic vice for main push collets 173E suitable for Index, Schaublin, Tarex, Traub 42

    The modular pnuematic vise is designed with a double-acting pneumatic system with toggle power multiplier that allows for high clamping force on the workpiece despite the overall dimensions being much smaller than standard pneumatic vises.

    Both closing and opening of the clamp are pneumatic without the use of springs for the return of the sleeve.

    The support planes for vertical and horizontal clamping and the gripper clamping system are completely ground and guarantee a clamping linearity <0.02.

    The clamp locking system is made of highly alloyed, hardened and tempered case-hardening steel with a hardness of 58 ± 2 HRC.

    The clamp's characteristics make it suitable both for single use on conventional machines and for series use on machining centres. Standard delivery includes the two brackets for single clamping.

    The dimensions correspond to the product chosen, but the drawing and images shown are indicative and not proportional.

    Learn More
    €910.00
  7. 771125 Modular pneumatic vice for main push collets 161E - BA25 suitable for Steinhäuser, Tsugami, Traub, Hanwha, Maier, Manurhin, Miyano, Nexturn

    Pneumatic vices are used for clamping workpieces on production machines such as machining centres, transfer machines, drills and for the assembly of various parts. The workpiece is clamped by means of an interchangeable gripper housed inside the device; the advantage over other clamping systems is the perfect centring of the workpiece.

    They are designed with a double-acting pneumatic system; both closing and opening of the gripper are pneumatic without the use of springs to return the sleeve. The external body of the device is designed to be fixed on the machine tool in both horizontal and vertical positions. The pneumatic vices are made of certified high-alloyed hardened and ground steel.

    The dimensions correspond to the product selected, but the drawing and images shown are indicative and not proportional.

    Learn More
    €560.00
  8. 771142 Pneumatic vice for main push collets 173E suitable for Index, Schaublin, Tarex, Traub 42

    Pneumatic vices are used for clamping workpieces on production machines such as machining centres, transfer machines, drills and for the assembly of various parts. The workpiece is clamped by means of an interchangeable gripper housed inside the device; the advantage over other clamping systems is the perfect centring of the workpiece.

    They are designed with a double-acting pneumatic system; both closing and opening of the gripper are pneumatic without the use of springs to return the sleeve. The external body of the device is designed to be fixed on the machine tool in both horizontal and vertical positions. The pneumatic vices are made of certified high-alloyed hardened and ground steel.

    The dimensions correspond to the product selected, but the drawing and images shown are indicative and not proportional.

    Learn More
    €723.00
View as List Grid

Items 1-10 of 78

Set Descending Direction
per page
Page
WhatsApp Chat WhatsApp Chat