Threading

The thread counter or reed gauge is a measuring instrument for determining the pitch of a thread.

The assortment consists of a series of thin metal foils on each of which the pitch is stamped.

Characteristics: 

- Blades: 24

- From... to...: Pitch 0,25 - 6,0

- All steel

- Milled spokes and teeth

The thread counter or reed gauge is a measuring instrument for determining the pitch of a thread.

The assortment consists of a series of thin metal foils on each of which the pitch is stamped.

Characteristics: 

- Blades: 52 

- From... to...: Pitch 62 - 4 / 0,25 - 6,0

- All steel

- Milled spokes and teeth

The thread counter or reed gauge is a measuring instrument for determining the pitch of a thread.

The assortment consists of a series of thin metal foils on each of which the pitch is stamped.

The gas thread is among the most common threading systems, it is a very fine pitch Whitworth thread, used for joining pipes.

Characteristics: 

- Thread: metric 60°, Whitworth 55°, Gas

- Blades: 58 

- From... to...: Pitch 62 - 4 / 0,25 - 6,0 / 28 - 8

- All steel

- Milled spokes and teeth

The thread counter or reed gauge is a measuring instrument for determining the pitch of a thread.

The assortment consists of a series of thin metal foils on each of which the pitch is stamped.

Characteristics: 

- Blades: 28 

- From... to...: Pitch 62 - 4

- All steel

- Milled spokes and teeth

ISO metric taps with reinforced shank DIN 371 up to M10, with reduced shank DIN 376 for taps over M10.
Universal tap made of special steel and with high-performance multi-layer coating, ideal for tapping a wide range of workpieces made of various materials, especially steel, aluminium alloys, light metals, nickel alloys and titanium. The spiral grind simplifies chip evacuation and makes it an excellent product for blind holes. It easily achieves thread depths of 2.5 times the nominal diameter for blind holes and 3 times the nominal diameter for through holes.
The material is manufactured in tolerance 6HX to enable the production of G6-tolerant parts that require subsequent heat or chemical treatment, e.g. electroplating, chrome plating, etc.

ISO metric coarse M taps with reinforced shank DIN 371 up to M10, with reduced shank DIN 376 for taps over M10.
Universal tap made of special steel and with high-performance multi-layer coating, ideal for tapping a wide range of workpieces made of various materials, especially steel, aluminium alloys, light metals, nickel alloys and titanium. The spiral grind simplifies chip evacuation and makes it an excellent product for through holes.
It easily reaches thread depths of 3 times the nominal diameter for through holes and 2.5 times the nominal diameter for blind holes.
The material is manufactured in tolerance 6HX to enable the production of G6-tolerant parts that require subsequent heat or chemical treatment, e.g. electroplating, chrome plating, etc.

ISO metric taps with reinforced shank DIN371 up to M10, with reduced shank DIN 376 for taps over M10.
Universal tap made of special steel and with high-performance multi-layer coating, ideal for tapping a wide range of workpieces made of various materials, especially steel, aluminium alloys, light metals, nickel alloys and titanium. The spiral grind simplifies chip evacuation and makes it an excellent product for blind holes. It easily achieves thread depths of 2.5 times the nominal diameter for blind holes and 3 times the nominal diameter for through holes.
The material is manufactured in tolerance 6HX to enable the production of G6-tolerant parts that require subsequent heat or chemical treatment, e.g. electroplating, chrome plating, etc.

ISO metric taps with reinforced shank DIN371 up to M10, with reduced shank DIN 376 for taps over M10.
Universal tap made of special steel and with high-performance multi-layer coating, ideal for tapping a wide range of workpieces made of various materials, especially steel, aluminium alloys, light metals, nickel alloys and titanium. The spiral grind simplifies chip evacuation and makes it an excellent product for through holes
It easily reaches thread depths of 3 times the nominal diameter for through holes and 2.5 times the nominal diameter for blind holes.
The material is manufactured in tolerance 6HX to enable the production of G6-tolerant parts that require subsequent heat or chemical treatment, e.g. electroplating, chrome plating, etc.

ISO metric fine MF-DIN13 taps with reinforced shank DIN371 up to M10, with reduced shank DIN 374 for taps over M10.
Universal tap made of special steel and with high-performance multi-layer coating, ideal for tapping a wide range of workpieces made of various materials, especially steel, aluminium alloys, light metals, nickel alloys and titanium. The spiral grind simplifies chip evacuation and makes it an excellent product for blind holes. It easily achieves thread depths of 2.5 times the nominal diameter for blind holes and 3 times the nominal diameter for through holes.
The material is manufactured in tolerance 6HX to enable the production of G6-tolerant parts that require subsequent heat or chemical treatment, e.g. electroplating, chrome plating, etc.

ISO metric fine MF-DIN13 taps with reinforced shank DIN371 up to M10, with reduced shank DIN 374 for taps over M10.
Universal tap made of special steel and with high-performance multi-layer coating, ideal for tapping a wide range of workpieces made of various materials, especially steel, aluminium alloys, light metals, nickel alloys and titanium. The spiral grind simplifies chip evacuation and makes it an excellent product for blind holes. It easily achieves thread depths of 2.5 times the nominal diameter for blind holes and 3 times the nominal diameter for through holes.
The material is manufactured in tolerance 6HX to enable the production of G6-tolerant parts that require subsequent heat or chemical treatment, e.g. electroplating, chrome plating, etc.