-
90078H Main collet ROUND for Schütte SG18 - AG20>18mm
Delivery times: 5-6 days even with HM coating, except unforeseen
The main collets will be supplied according to the available profiles, if you need a particular profile please write to us by clicking here
Clamping faces tungsten carbide coated. To guarantee a frontal closing load of about 50% higher than uncoated as well as extending the life of the collet.
Learn More€56.00
(Incl. Tax: €68.32) -
Q2202500 Pick-up collet ROUND suitable for Schütte SG18 -AG20, 35161H/G
To complete the order you must fill the boxes above depending on whether the measurement is integer or decimal:
if it measures whole, completes the first box, if it measures decimal, the second box.
Learn More€85.00
(Incl. Tax: €103.70) -
B 3220-A-G ISZ Chuck lever suitable for Schütte multispindle SG 18 - AG 20 series
It is advisable to completely replace the assembly set on each individual unit and/or spindle.
The dimensions in the drawing correspond to the selected product, the picture shows the selected product.
Learn More€45.90
(Incl. Tax: €56.00) -
-
C 3210A-G1SZ Clamping sleeve suitable for Schütte AG20 - SG18 with 9 grooves
€275.00
(Incl. Tax: €335.50) -
90076H Main Collet ROUND for Schütte SG18 - AG20 (Keyway 5mm)
Delivery times: 5-6 days even with HM coating, except unforeseen
Clamping faces tungsten carbide coated. 50% higher than uncoated as well as extending the life of the collet.
The main collets will be supplied according to the available profiles, if you need a particular profile please write to us by clicking here
Learn More€53.00
(Incl. Tax: €64.66) -
90076H Main Collet EXAGONAL for Schütte SG18 - AG20 (Keyway 5mm)
Delivery times: 5-6 days even with HM coating, except unforeseen
Clamping faces tungsten carbide coated. 50% higher than uncoated as well as extending the life of the collet.
The main collets will be supplied according to the available profiles, if you need a particular profile please write to us by clicking here
Learn More€68.00
(Incl. Tax: €82.96) -
C 3210A-G1SZ Clamping sleeve suitable for Schütte AG20 - SG18 with 6 grooves
€275.00
(Incl. Tax: €335.50)