-
75.03.34 Fork for Thread chasing suitable for Gildemeister DMG Mori GM32-GM35-GM42
750334 Forcella per filettatore con maschio e filiera Gildemeister DMG Mori GM32, GM35, GM42
Learn More€63.50
(Incl. Tax: €77.47) -
35.07.146 Radial gibplate pos. 3 suitable for Gildemeister GM32, GM35, GM42AC
The wedge is delivered as a semi-finished product, as it must be cut, machined and adjusted correctly on the slide in your possession.
Learn More€242.00
(Incl. Tax: €295.24) -
-
37.55.001 Fresatore Frontale Rotante per Gildemeister GM32, GM35, GM42
Fresatore Frontale rotante composto da:
- Coppia ruote intercambiabili scelte secondo tabella allegata
Escluso:
- Boccola di guida
- Distanziali per pacco fresa
Consegna: 2 settimane salvo diversa comunicazione mezzo mail
Learn More€13,500.00
(Incl. Tax: €16,470.00) -
37.33.100 Central block cam for Gildemeister GM32, GM35, GM35AC, GM42, GM42AC
Central block cam, not original but interchangeable, to be mounted on DMG -Mory Gildemeister multi-spindle automatic lathes with guide diameter and ground profile hardened
Cutting angle: 51°Start Angle: 3°Dwell: 6°Maximum Radius: 124Descent angle: 48°Minimum Radius: 53mmRapid Lift: See diagramDelivery: 10 days
As low as €410.00
(Incl. Tax: €500.20) -
37.33.106 Central block cam for Gildemeister - DMG Mori GM32, GM35, GM35AC, GM42, GM42AC h=40x165°
Central block cam, not original but interchangeable, to be mounted on DMG -Mory Gildemeister multi-spindle automatic lathes with guide diameter and ground profile hardened
Delivery: 10 days
Learn More€410.00
(Incl. Tax: €500.20) -
37.33.105 Central block cam for Gildemeister - DMG Mori GM32, GM35, GM35AC, GM42, GM42AC h20x165°
Central block cam, not original but interchangeable, to be mounted on DMG -Mory Gildemeister multi-spindle automatic lathes with guide diameter and ground profile hardened
Delivery: 10 days
Learn More€410.00
(Incl. Tax: €500.20) -
37.33.104 Central block cam for Gildemeister - DMG Mori GM32, GM35, GM35AC, GM42, GM42AC h10x165°
Central block cam, not original but interchangeable, to be mounted on DMG -Mory Gildemeister multi-spindle automatic lathes with guide diameter and ground profile hardened
Delivery: 10 days
Learn More€410.00
(Incl. Tax: €500.20) -
37.33.103 Central block cam for Gildemeister - DMG Mori GM32, GM35, GM35AC, GM42, GM42AC h3x165°
Central block cam, not original but interchangeable, to be mounted on DMG -Mory Gildemeister multi-spindle automatic lathes with guide diameter and ground profile hardened
Delivery: 10 days
Learn More€410.00
(Incl. Tax: €500.20)