-
9069E Main Collet EXAGONAL for Gildemeister GM35, GM35AC, GM35/8AC, GMC35, Mori-Say 6/32, Mori-Say 8/32
Delivery times: 5-6 days even with HM coating, except unforeseen
The main collets will be supplied according to the available profiles, if you need a particular profile please write to us by clicking here
Learn More€80.00
(Incl. Tax: €97.60) -
-
37.33.100 Central block cam for Gildemeister GM32, GM35, GM35AC, GM42, GM42AC
Central block cam, not original but interchangeable, to be mounted on DMG -Mory Gildemeister multi-spindle automatic lathes with guide diameter and ground profile hardened
Cutting angle: 51°Start Angle: 3°Dwell: 6°Maximum Radius: 124Descent angle: 48°Minimum Radius: 53mmRapid Lift: See diagramDelivery: 10 days
As low as €410.00
(Incl. Tax: €500.20) -
37.33.106 Central block cam for Gildemeister - DMG Mori GM32, GM35, GM35AC, GM42, GM42AC h=40x165°
Central block cam, not original but interchangeable, to be mounted on DMG -Mory Gildemeister multi-spindle automatic lathes with guide diameter and ground profile hardened
Delivery: 10 days
Learn More€410.00
(Incl. Tax: €500.20) -
37.33.105 Central block cam for Gildemeister - DMG Mori GM32, GM35, GM35AC, GM42, GM42AC h20x165°
Central block cam, not original but interchangeable, to be mounted on DMG -Mory Gildemeister multi-spindle automatic lathes with guide diameter and ground profile hardened
Delivery: 10 days
Learn More€410.00
(Incl. Tax: €500.20) -
37.33.104 Central block cam for Gildemeister - DMG Mori GM32, GM35, GM35AC, GM42, GM42AC h10x165°
Central block cam, not original but interchangeable, to be mounted on DMG -Mory Gildemeister multi-spindle automatic lathes with guide diameter and ground profile hardened
Delivery: 10 days
Learn More€410.00
(Incl. Tax: €500.20) -
37.33.103 Central block cam for Gildemeister - DMG Mori GM32, GM35, GM35AC, GM42, GM42AC h3x165°
Central block cam, not original but interchangeable, to be mounted on DMG -Mory Gildemeister multi-spindle automatic lathes with guide diameter and ground profile hardened
Delivery: 10 days
Learn More€410.00
(Incl. Tax: €500.20) -
37.33.102 Central block cam for Gildemeister GM32, GM35, GM35AC, GM42, GM42AC h=0x171°
Central block cam, not original but interchangeable, to be mounted on DMG -Mory Gildemeister multi-spindle automatic lathes with guide diameter and ground profile hardened
Delivery: 10 days
Learn More€410.00
(Incl. Tax: €500.20) -
35.01.130 Chuck lever suitable for Gildemeister multispindle - DMG Mori GM32 - GM35
It is advisable to completely replace the assembly set on each individual unit and/or spindle.
The dimensions in the drawing correspond to the selected product, the picture shows the selected product.€78.50
(Incl. Tax: €95.77)