-
-
C2982050 RUPAC MicroMet Series wire rulers for checking the flatness of special steel surfaces, DIN 874 precision, various lengths to choose
Flush rulers Serie MicroMet.Particularly suitable for checking the flatness of surfaces. Made of special steel, precision to DIN 874.Hardened, ground and precision lapped measuring edge.With insulating guillotines.With case.Learn MoreAs low as €18.00
(Incl. Tax: €21.96) -
2982300 RUPAC Wire ruler for checking the flatness of special steel surfaces, DIN 874 precision, length L=300mm
Flush rulers Serie MicroMet.Particularly suitable for checking the flatness of surfaces. Made of special steel, precision to DIN 874.Hardened, ground and precision lapped measuring edge.With insulating guillotines.With case.Learn More€73.00
(Incl. Tax: €89.06) -
2006027 High-precision ground linear spirit level MicroMet series, length 300mm, sensitivity 0.02
High-precision ground MicroMet series linear spirit levels.
The dimensions correspond to the product selected, but the drawing and images shown are indicative and not proportional.
Learn More€240.00
(Incl. Tax: €292.80) -
2150300 RUPAC Control master for linear measurements MicroMet PLUS Series for vernier calipers and gauges, length 300mm
Control master for linear measurements MicroMet PLUS Series for slide gauges and height gauges. This master is made with blocks arranged with fixed measurements to allow a quick and precise control. It is normally used for the control of the table movement of machine tools and the accuracy of slide gauges, linear height gauges and slide gauges.
Learn MoreSpecial Price €1,272.05 Regular Price €1,339.00
(Incl. Tax: €1,551.90) -
C2150300 RUPAC Control master for linear measurement MicroMet PLUS Series for slide gauges and height gauges, available in various lengths of your choice
Control master for linear measurements MicroMet PLUS Series for slide gauges and height gauges. This master is made with blocks arranged with fixed measurements to allow a quick and precise control. It is normally used for the control of the table movement of machine tools and the accuracy of slide gauges, linear height gauges and slide gauges.
Measuring steps: See table
Learn More
Accuracy: See tableAs low as €1,272.05
(Incl. Tax: €1,551.90) -
LTF 200.04 Fine pole permanent magnetic chucks with neodymium iron boron magnets NdFeB - 300x150x51mm - Magnetic force 3660Kg 36000N
Nominal Vertical pole force: 80 N/cm2
Learn More
Minimum suggested thickness: 1.5 mm
Max performance thickness: 5 mm
Minimum piece size: 2x2 cm = 4 cm2Special Price €526.05 Regular Price €751.50
(Incl. Tax: €641.78) -
LTF 200.08 Fine pole permanent magnetic chucks with neodymium iron boron magnets NdFeB - 300x200x51mm - Magnetic force 4890Kg 48000N
Nominal Vertical pole force: 80 N/cm2
Learn More
Minimum suggested thickness: 1.5 mm
Max performance thickness: 5 mm
Minimum piece size: 2x2 cm = 4 cm2Special Price €701.40 Regular Price €1,002.00
(Incl. Tax: €855.71) -
LTF 180.03 Double magnetic pole on permanent magnetic chucks for milling - 300x150x56 mm- Magnetic force 8250Kg - 81000N
Nominal Vertical pole force: 180 N/cm2
Learn More
Minimum suggested thickness: 2.5 mm
Max performance thickness: 10 mm
Minimum piece size: 2x2 cm = 4 cm2Special Price €739.66 Regular Price €1,193.00
(Incl. Tax: €902.39) -
LTF 512.05 Single opening sine table complete with permanent magnetic chuck - 300x150x102 mm
Ideal for high precision grinding as well as for machining operations of small workpieces.
Positive locking at all angles without any distortion.
Tilting angle 0°-50°.Magnetic force: 80 N/cm2.
Pole pitch: 0,5+1,5 mm.Tables made of hardened steel.Very low residual magnetization, even distribution of magnetic force.Learn More
Wide working area.
Precision angle: 0,007/100 mm.Special Price €773.76 Regular Price €1,248.00
(Incl. Tax: €943.99)
