-
MF 7817 Chuck lever suitable for TORNOS M4
It is advisable to completely replace the assembly set on each individual unit and/or spindle.
The dimensions in the drawing correspond to the selected product, the picture shows the selected product.
Learn More€24.50
(Incl. Tax: €29.89) -
Feedback rod for Whitworth threads 55°
See table for information
Learn MoreAs low as €48.00
(Incl. Tax: €58.56) -
-
C2982050 RUPAC MicroMet Series wire rulers for checking the flatness of special steel surfaces, DIN 874 precision, various lengths to choose
Flush rulers Serie MicroMet.Particularly suitable for checking the flatness of surfaces. Made of special steel, precision to DIN 874.Hardened, ground and precision lapped measuring edge.With insulating guillotines.With case.Learn MoreAs low as €18.00
(Incl. Tax: €21.96) -
2982050 RUPAC Wire ruler for checking the flatness of special steel surfaces, DIN 874 precision, length L=50mm
Flush rulers Serie MicroMet.Particularly suitable for checking the flatness of surfaces. Made of special steel, precision to DIN 874.Hardened, ground and precision lapped measuring edge.With insulating guillotines.With case.Learn More€18.00
(Incl. Tax: €21.96) -
160.425-050 Collet chuck ER40 with "STANDARD" clamping nut DIN 6499 - Shank Ø25mm / L=50mm
Use: Universal application machine tools and accessoriesCollet type: STANDARD with reduced overall dimensionsCollet type: ER40Max. overall diameter with nut: Ø63mmThe dimensions correspond to the product chosen, the drawing and images shown are indicative and not proportional.€66.00
(Incl. Tax: €80.52) -
160.426-050 Collet chuck ER40 with "STANDARD" clamping nut DIN 6499 - Shank Ø25.40mm / L=50mm
Impiego: Applicazione universale macchine utensili e accessoriGhiera tipo: STANDARD con ingombri ridottiPinza tipo: ER40Diametro Max ingombro con ghiera: Ø63mmLe quote del disegno corrispondono al prodotto scelto, le immagini raffigurate sono indicative e non proporzionate.Learn More€66.00
(Incl. Tax: €80.52) -
160.431-050 Collet chuck ER40 with "STANDARD" clamping nut DIN 6499 - Shank Ø31.75mm / L=50mm
Use: Universal application machine tools and accessoriesCollet type: STANDARD with reduced overall dimensionsCollet type: ER40Max. overall diameter with nut: Ø63mmThe dimensions correspond to the product chosen, the drawing and images shown are indicative and not proportional.€83.00
(Incl. Tax: €101.26) -
160.319-050 Collet chuck ER32 with "STANDARD" clamping nut DIN 6499 - Shank Ø19,05mm / L=50mm
Use: universal application machine tools and accessoriesClamping nute type: STANDARDCollet type: ER32Max. overall diameter with ring nut: Ø50mmThe dimensions correspond to the product chosen, the drawing and images shown are indicative and not proportional.Learn More€55.00
(Incl. Tax: €67.10) -
160.320-050 Collet chuck ER32 with "STANDARD" clamping nut DIN 6499 - Shank Ø20mm / L=50mm
Use: universal application machine tools and accessoriesClamping nute type: STANDARDCollet type: ER32Max. overall diameter with ring nut: Ø50mmThe dimensions correspond to the product chosen, the drawing and images shown are indicative and not proportional.€55.00
(Incl. Tax: €67.10)