-
100E - F6-599 Collets ROUND for Single-Spindle Lathes Index, Traub
Made of high quality steel that does not alter the accuracy and characteristics when the temperature changes during chip removal operations.
Excellent value for money
The dimensions correspond to the chosen product, but the design and images shown are indicative and not proportionate.
The main collets will be supplied according to the available profiles, if you need a particular profile please write to us by clicking here
Delivery: about one week from order
Contact us by Email info@tadaahshop.com for price -
TD-036100 Barloader collet suitable for Cucchi and Iemca– Thread M6X0.75 from Ø2 to Ø8
Hole size or bar diameter are chosen by filling in the field From "Xmin" To "Xmax".
Delivery: Confirmation by e-mail or Whatsapp.
Hexagonal bars: consider the diameter circumscribed by the vertices of the hexagon.
The pliers are made of certified high-alloy steel, hardened and ground. The production process is carried out entirely in Italy with high-precision machine tools and strict quality control.
The dimensions correspond to the product chosen, but the drawing and images shown are indicative and not proportional.
Learn More€16.00
(Incl. Tax: €19.52) -
TD-036101 Barloader collet suitable for Cucchi and Iemca – Thread M6X0.75 from Ø2 to Ø8
Hole size or bar diameter are chosen by filling in the field From "Xmin" To "Xmax".
Delivery: Confirmation by e-mail or Whatsapp.
Hexagonal bars: consider the diameter circumscribed by the vertices of the hexagon.
The pliers are made of certified high-alloy steel, hardened and ground. The production process is carried out entirely in Italy with high-precision machine tools and strict quality control.
The dimensions correspond to the product chosen, but the drawing and images shown are indicative and not proportional.
Learn More€15.00
(Incl. Tax: €18.30) -
PCCHM10 Plastic bar feed collet ROUND - HEXAGONAL for Cucchi Bar Loader with right thread M6x0.75mm
Delivery: about 1 week, with confirmation by email.
Learn MoreSpecial Price €67.20 Regular Price €84.00
(Incl. Tax: €81.98) -
516.010 Barloader revolving IEMCA Diameter 10mm for collet with right thread M6x0.75mm - attack M8x1mm
Non-original interchangeable product.
Delivery: approximately 1 week, with confirmation by mail.
The dimensions correspond to the product chosen, but the drawing and images shown are indicative and not proportional.
Learn MoreSpecial Price €72.00 Regular Price €80.00 -
517.010 Bar loader revolving Diameter 10mm for collect with right thread M6x0.75mm - attack M7x1mm
Non-original interchangeable product.
Delivery: approximately 1 week, with confirmation by mail.
The dimensions correspond to the product chosen, but the drawing and images shown are indicative and not proportional.
Special Price €87.30 Regular Price €97.00 -
210E- SH10 Bar feed collets for bar loaders suitable for FMB - TRAUB - HAGENUK - IEMCA - ROBOBAR - LNS - SAMECA - MINISPRINT - MINITURBO
Hole size or bar diameter are chosen by filling in the field From "Xmin" To "Xmax".
Interchangeable non-original product.
Delivery: about 1 week, with confirmation by mail or Whatsapp.
Consegna: conferma mezzo
The collets are made of certified high-alloy steel, hardened and ground. The production process is carried out entirely in Italy with high precision machine tools and strict quality control.
The dimensions correspond to the product chosen, but the drawing and images shown are indicative and not proportional.
Learn More€33.00
(Incl. Tax: €40.26) -
PCE Intruments PCE-C-R10LFC 100-H6 A force sensor made of stainless steel range 100kg height 6mm diameter 10mm
Thanks to its small dimensions, the miniature force sensor is easy to use on hard-to-reach measuring points. The height in particular is something special with this force sensor. With a diameter of only 10 mm, this force sensor is smaller in diameter than a 1 cent coin.Principles of operation of the load cell:- Bending load cell
A simple mechanical load cell can be built from spiral metal springs. By pulling the spring into a spiral, or compressing along the axis, the variation of the length in the measuring range is proportional to the force exerted
- Hydraulic load cell
A hydraulic force sensor often takes the form of a load cell. In the most common model the force acts on a piston that protrudes slightly, and in turn presses on the cylinder filled with hydraulic fluid.
- Strain gauge load cells
The load cell with strain gauge technology uses elastic deformation of metal wires. However, the variation in length is not measured, but that of the electrical resistance.
- Load cell with electromagnetic compensation
The load cell with compensation, generates a magnetic field around a coil under current.
- Piezoelectric load cell
When a load is applied, a charge proportional to the applied force is created on the surface of the piezoelectric crystals.
€249.90
(Incl. Tax: €304.88) - Bending load cell
-
PCE Intruments PCE-C-R10LFC 50-H6 A force sensor made of stainless steel range 50kg height 6mm diameter 10mm
Thanks to its small dimensions, the miniature force sensor is easy to use on hard-to-reach measuring points. The height in particular is something special with this force sensor. With a diameter of only 10 mm, this force sensor is smaller in diameter than a 1 cent coin.Principles of operation of the load cell:- Bending load cell
A simple mechanical load cell can be built from spiral metal springs. By pulling the spring into a spiral, or compressing along the axis, the variation of the length in the measuring range is proportional to the force exerted
- Hydraulic load cell
A hydraulic force sensor often takes the form of a load cell. In the most common model the force acts on a piston that protrudes slightly, and in turn presses on the cylinder filled with hydraulic fluid.
- Strain gauge load cells
The load cell with strain gauge technology uses elastic deformation of metal wires. However, the variation in length is not measured, but that of the electrical resistance.
- Load cell with electromagnetic compensation
The load cell with compensation, generates a magnetic field around a coil under current.
- Piezoelectric load cell
When a load is applied, a charge proportional to the applied force is created on the surface of the piezoelectric crystals.
€249.90
(Incl. Tax: €304.88) - Bending load cell
-
PCE Intruments PCE-C-R10LFC 5-H3,5 A force sensor made of stainless steel range 5 kg height 3,5 mm diameter 10 mm
Thanks to its small dimensions, the miniature force sensor is easy to use on hard-to-reach measuring points. The height in particular is something special with this force sensor. With a diameter of only 10 mm, this force sensor is smaller in diameter than a 1 cent coin.Principles of operation of the load cell:- Bending load cell
A simple mechanical load cell can be built from spiral metal springs. By pulling the spring into a spiral, or compressing along the axis, the variation of the length in the measuring range is proportional to the force exerted
- Hydraulic load cell
A hydraulic force sensor often takes the form of a load cell. In the most common model the force acts on a piston that protrudes slightly, and in turn presses on the cylinder filled with hydraulic fluid.
- Strain gauge load cells
The load cell with strain gauge technology uses elastic deformation of metal wires. However, the variation in length is not measured, but that of the electrical resistance.
- Load cell with electromagnetic compensation
The load cell with compensation, generates a magnetic field around a coil under current.
- Piezoelectric load cell
When a load is applied, a charge proportional to the applied force is created on the surface of the piezoelectric crystals.
€225.90
(Incl. Tax: €275.60) - Bending load cell